Removal Procedure
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Note: The inlet manifold that is used on the 3013, 3014, and 3024 Engines is removable as a separate part. The inlet manifold on the 3003 Engine is part of the valve mechanism cover.
- Remove bolts (1) and inlet manifold (2) from the cylinder head.
 | |
| Illustration 1 | g00592847 |
- Remove the gasket for the inlet manifold from the spacer plate.
- Remove spacer plate (3) for the inlet manifold.
 | |
| Illustration 2 | g00592858 |
- Remove spacer plate gasket (4) for the inlet manifold from the cylinder head.
 | |
| Illustration 3 | g00592865 |