Water Pump - Assemble
组装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 1P-0510     | 冲头总成     | 1     |
B     | 7N-8268     | 安装工具     | 1     |
C     | 438-8155     | 安装工具     | 1     |
参考参考再使用和修补指南, SEBF8418, "3500 系列发动机水泵的修补"以了解再使用和修补指南。
- 更换泵壳体 (7) 中的滤清器 (15) 。
Show/hide table
图 1 | g03419186 |
- 按照环 (14) 和定位销。
Show/hide table
图 2 | g03418663 |
- 使用工具 (A) 将唇形密封 (13) 安装到泵壳体 (7) 中。
- 将轴组件 (9) 、止推垫圈 (6) 、螺栓 (5) 和垫圈安装到泵壳体中。
Show/hide table
图 3 | g03476081 |
- 使用工具 (B) 安装固定密封件总成 (11) ,使陶瓷侧朝外。
Show/hide table
图 4 | g03476061 |
Show/hide table
图 5 | g03476619 |
- 使用工具 (C) 和适当的压具将安装旋转密封件总成 (10) 。 使用安装夹 (X) 将旋转密封件总成 (10) 安装到位,直到密封件总成 (10) 完全座入。 拆下安装夹 (X) 。
注: 请勿使用锤子安装密封件总成,因为这会损坏密封件总成的陶瓷表面。
Show/hide table
图 6 | g03476066 |
Show/hide table
图 7 | g03419283 |
- 用一薄层发动机机油润滑轴组件。 使用适当的压具将叶轮 (8) 安装在泵壳体 (7) 中以及轴组件上。 叶轮 (8) 的安装深度为 0.0 ± 0.15 mm (0.00000 ± 0.00591 in)(从轴组件的末端到叶轮外表面)。
Show/hide table
图 8 | g03419292 |
- 将螺塞组件 (12) 和 O 形密封圈安装的泵壳体 (7) 中。
Show/hide table
图 9 | g03419302 |
- 将 O 形密封圈 (4) 和 O 形密封圈 (3) 安装在盖组件 (2) 上。
Show/hide table
图 10 | g03475339 |
- 安装盖组件 (2) 、螺柱和螺母 (1) 。 将螺柱拧紧至 35 ± 5 N·m (25 ± 3 lb ft) 的扭矩。 将螺母 (1) 拧紧至 27 ± 5 N·m (19 ± 3 lb ft) 的扭矩。
Show/hide table
图 11 | g03475023 |
End By: 安装水泵。
Caterpillar Information System:
3406E Marine Engine Exhaust Manifold
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
3500B Engines Water Pump - Disassemble
G3606 and G3608 Engines Gas Pressure Regulator - Disassemble
3406E and 3456 Generator Set Engines Housing (Front) - Remove
3406E Generator Set Engines Gauges and Indicators
3406E and 3456 Generator Set Engines Cooling System
G3500 Engines Water Pump - Install
3406E and C15 Marine Engines Magnetic Pickup
G3500 Engines Water Pump - Remove
3516B Generator Set Engines with Dynamic Gas Blending Lubrication System Operation
3406E and 3456 Generator Set Engines Lubrication System
3406E Marine Engine Engine Oil Pan
3406E Marine Engine Auxiliary Water Pump
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Piston Cooling Jet
3406E Generator Set Engines Engine Shutoffs and Engine Alarms
3406E Marine Engine Flywheel Housing
3406E and 3456 Generator Set Engines Housing (Front) - Install
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0546 - FMI 06 Ether Hold Relay short to +batt
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0546 - FMI 05 Ether Hold Relay open/short to ground
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Inlet Manifold - Remove - 3013, 3014, and 3024 Engines
3500B and 3500B High Displacement Generator Set Engines Alternator
3406E and C15 Marine Engines Air Starting Motor Pressure Regulating Valve
3406E and 3456 Generator Set Engines Water Pump - Remove