Unit Injector Hydraulic Pump - Disassemble
Show/hide table
所需工具 | |||
---|---|---|---|
工具 | 零件号 | 零件描述 | 数量 |
A | FT-2610 | 驱动器管 | 1 |
B | 4D-3120 | 螺栓 | 1 |
C | FT-2612 | 轴承拆卸工具 | 1 |
D | 1P-1861 | 挡圈钳 | 1 |
开始:
- 拆下单体喷油器液压泵。 请参阅拆解和组装, "单体喷油器液压泵 - 拆卸"。
- 拆下喷油作动压力控制阀。 请参阅拆解和组装, "喷油作动压力控制阀 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
Show/hide table
注意 |
---|
不要让脏物进入燃油系统。 彻底清洁将要拆开的燃油系统部件的周围区域。 在拆开的燃油系统部件上安放适当的盖。 |
- 拆下压力补偿器阀 (1)。
- 拆卸歧管 (2)。
- 从阀体 (3) 上拆下螺栓 (4)。
Show/hide table
图 2 g01094416 - 拆下阀体 (3)、控制活塞 (6) 和密封垫 (5)。
Show/hide table
图 3 g01094422 - 拆下旋转总成 (7)。 可能有必要对旋转总成进行微调,以便拆下旋转总成。
Show/hide table
图 4 g01094430 - 将工具 (A) 安装到泵总成中。 使用适当的压具从前轴承上拆下轴 (8)。
Show/hide table
图 5 g01094431 - 拆下螺栓 (9)。 拆下盖 (10)。
Show/hide table
图 6 g01094441 - 从弹簧座 (11) 对面的枢轴轴承 (14) 上拆下 O 形密封圈 (12)。 用手拧紧,将工具 (B) 安装到枢轴轴承中。
- 如有必要,拆下螺塞 (13)。
- 将工具 (B) 拧紧到枢轴轴承中,直到拆下枢轴轴承。
Show/hide table
图 7 g01094444 - 为了从泵总成另一侧上拆下枢轴轴承,需要紧握轭 (15)。 使用工具 (B) 拆下枢轴轴承。
- 拆下轭 (15).。
Show/hide table
图 8 g01094447 Show/hide table弹簧加压的零件和/或盖板可能导致人身伤害。
拆卸盖板时弹簧力将被释放。
松动螺栓时做好准备把持住弹簧加载的盖板。
- 拆下弹簧座 (11) 和弹簧。
Show/hide table
图 9 g01094449 - 使用工具 (D) 拆下挡圈 (17)。 拆下轴承 (16)。
Show/hide table
图 10 g01094450 - 使用工具 (D) 拆下挡圈 (19)。 拆下轴封 (18)。
Show/hide table
图 11 g01094452 - 使用工具 (C) 和适当的压具拆下轴承 (20)。
Show/hide table
图 12 g01094458 - 从阀体 (3) 上拆下螺塞 (21) 和螺塞 (22)。
Show/hide table
图 1 | g01094410 |
Caterpillar Information System:
3600 Diesel Marine Monitoring System Using LED Indicators to Troubleshoot Modules
C15 and C18 Petroleum Generator Sets Emissions Warranty Information
3500B Marine Propulsion Engines Engine Rating Definitions
3408E and 3412E Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
Electric Protection System Energize-To-Run For Generator Set, Industrial and Marine Diesel Engines ETR Junction Box-Switchgear Required (OP,WT,OS)
G3606 and G3608 Engines Spark Plugs - Remove and Install
3500B and 3500 Marine Propulsion Engines with EUI Option Emergency Stopping
3612 and 3616 Engines Fuel Transfer Pump
G3606 and G3608 Engines Gas Admission Valve - Assemble
3500 and 3500B Engines Engine Rating Conditions
3612 and 3616 Engines Engine Design
3600 Diesel Marine Monitoring System PLC Monitoring Utility
3408E and 3412E Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
3500B and 3500 Marine Propulsion Engines with EUI Option Cold Weather Starting
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks MID 036 - CID 0091 - FMI 08 Throttle Position signal abnormal
3500B and 3500 Marine Propulsion Engines with EUI Option Before Starting Engine
797F Off-Highway Truck Steering System Steering Control Valve - Adjust
3408E and 3412E Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
3612 and 3616 Engines Fuel Injector - Distillate Fuel
3600 Diesel Marine Monitoring System Programmable Logic Controller Troubleshooting
3600 Diesel Marine Monitoring System System Power
3500B and 3500 Marine Propulsion Engines with EUI Option After Starting Engine
3612 and 3616 Engines Fuel Pressure Control Valve - Heavy Fuel Oil
Generator Service Literature Index{4450} Generator Service Literature Index{4450}