G3408 and G3412 Engines Caterpillar


Water Temperature Regulator

Usage:

G3408 6NB



Illustration 1g00274459

Temperature regulator

When the water temperature regulator is completely open, the temperature is the following value. ... 98 °C (208 °F)

Minimum opening distance at 98 °C (208 °F) ... 9.53 mm (0.375 inch)

Caterpillar Information System:

3054 and 3056 Industrial and Generator Set Engines Engine Design
G3606 and G3608 Engines Vibration Damper - Assemble
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Level Gauge (Dipstick) - Remove and Install
3406C (PEEC III) Truck Engines Engine Design
G3606 and G3608 Engines Vibration Damper - Disassemble
SR4 HV and SR4B HV Generators General Maintenance Information
G3408 and G3412 Engines Electric Starting Motor
G3606 and G3608 Engines Vibration Damper - Install
3412E, C30 and C32 Marine Engines Heat Exchanger - Install
3054 Engine for Caterpillar Built Machines Fuel Filter Base - Remove and Install
3054 Engine for Caterpillar Built Machines Gear Group (Front) - Install
3408E and 3412E Engines for Caterpillar Built Machines Cylinder Block
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Engine Oil Scavenge Pump
G3606 and G3608 Engines Flywheel and Ring Gear - Remove and Install
3054 and 3056 Industrial and Generator Set Engines Cooling System
Procedure for Replacing the Software for the Electronic Ignition System (EIS){1902} Procedure for Replacing the Software for the Electronic Ignition System (EIS){1902}
G3408 and G3412 Engines Turbocharger
3054 and 3056 Industrial and Generator Set Engines Lubrication System
G3408C, G3412C, G3508, G3512 and G3516 Gas Engine Driven Chillers General Information
3406E and 3456 Generator Set Engines Flywheel - Install
G3408 and G3412 Engines Governor and Magneto Drive
G3408C, G3412C, G3508, G3512 and G3516 Gas Engine Driven Chillers Joint Assembly for Water Line
3408E and 3412E Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
Caterpillar PRELUB® Diagnostics{1469} Caterpillar PRELUB® Diagnostics{1469}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.