Illustration 1 | g00579817 |
The direction of rotation of the motor is clockwise when the motor is viewed from the drive end.
Minimum speed with no load at 20 Volts ... 5500 rpm
Maximum speed with no load at 20 Volts ... 7500 rpm
The current consumption at no load is listed below:
Minimum current consumption with the solenoid at 20 Volts ... 95 Amperes
Maximum with solenoid at 20 Volts ... 120 Amperes
Clearance between pinion and housing ... 8.3 to 9.9 mm (0.33 to 0.39 inch)
(1) Minimum tension of brush spring ... 18 N (4 lb)
(2) Torque for the screws that hold the lever to the housing ... 20 ± 3 N·m (15 ± 2 lb ft)
(3) Torque for the terminal nuts ... 27 ± 34 N·m (20 ± 25 lb ft)
Illustration 2 | g00579831 |
The direction of rotation of the motor is clockwise when the motor is viewed from the drive end.
Current consumption at 12 Volts with no load and a minimum speed of 3500 rpm. ... 95 Amperes maximum
(1) Torque for housing bolts ... 11 N (2.5 lb)
(2) Torque for terminal nuts ... 27.0 to 33.8 N·m (20.0 to 25.0 lb ft)
(3) Clearance between the pinion and the housing ... 0.51 to 1.27 mm (0.02 to 0.05 inch)
Starter Solenoids
Delco-Remy
Illustration 3 | g00587211 |
Current Draw
The current that pulls in the windings at 5 volts is the following value. ... 9 to 11.5 Amperes
The current that pulls in the windings at 20 to 24 volts is the following value. ... 40 to 55.2 Amperes
At 20 to 24 volts, the following current will hold the windings. ... 6.8 Amperes maximum
Prestolite
Illustration 4 | g00587217 |
Current draw at 21 °C (70 °F)
The current that pulls in the windings at 12 volts is the following value. ... 23.2 to 26.6 Amperes
At 12 volts, the following current will hold the windings. ... 4.1 to 4.8 amperes