Fuel Injection Nozzles - Install
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install dust seal (5) and spacer (4) .
Show/hide table
Illustration 1 | g00545200 |
- Install the seal washer on the end of fuel injection nozzle (3) .
- Install fuel injection nozzle (3) into the cylinder head.
- Install clamp (2) and two bolts (1). Tighten the bolts to a torque of 12 N·m (106 lb in).
Show/hide table
Illustration 2 | g00545199 |
End By: Install the fuel injection lines. Refer to Disassembly and Assembly, "Fuel Injection Lines - Remove and Install".
Caterpillar Information System:
3054 and 3056 Industrial and Generator Set Engines Fuel Injection Nozzles - Remove
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Cooler - Remove
3054 Engine for Caterpillar Built Machines Fuel Injection Lines - Remove and Install
SR4 HV and SR4B HV Generators Glossary
3412E and C30 Marine Engines Front Power Take-Off (FPTO)
3054 Engine for Caterpillar Built Machines Fuel Transfer Pump - Assemble
3408E and 3412E Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
3406C (PEEC III) Truck Engines Engine Vibration Troubleshooting
3054 Engine for Caterpillar Built Machines Fuel Transfer Pump - Disassemble
G3606 and G3608 Engines Water Pump - Assemble
3412E and C30 Marine Engines Air Starting System
G3606 and G3608 Engines Water Pump - Disassemble
3054 and 3056 Industrial and Generator Set Engines Fuel Injection Pump - Remove
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Cooler - Install
3054 and 3056 Industrial and Generator Set Engines Fuel Injection Pump - Install
3054 Engine for Caterpillar Built Machines Turbocharger - Remove
3054 Engine for Caterpillar Built Machines Turbocharger - Install
3054 Engine for Caterpillar Built Machines Turbocharger - Disassemble
G3606 and G3608 Engines Water Pump Seal - Remove
3054 Engine for Caterpillar Built Machines Turbocharger - Assemble
3054 and 3056 Industrial and Generator Set Engines Inlet Manifold - Remove
3612 and 3616 Fast Vessel Engines Hourly Performance Log
3606 and 3608 Engines Cooling System Operation
3054 and 3056 Industrial and Generator Set Engines Inlet Manifold - Install