Water Pump Seal - Remove
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 9S-1366     | 螺栓     | 2     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
注: 将水泵安装至发动机上时,才可更换水泵密封件。 使用下列步骤更换水泵密封件。
- 排出发动机中的冷却液。
- 这些步骤适用于 G3606 发动机。
- 从管和水泵 (3) 上卸下螺栓 (4) 。 拆下弯头 (1) 。
- 拆下弯头 (2) 。
Show/hide table
图 1 | g00545457 |
G3606 发动机 |
- 这些步骤适用于 G3608 发动机。
- 拆下螺栓 (8) 。 拆下适配器 (5) 。
- 拆下螺栓 (7) 。 断开弯头 (6) 。
Show/hide table
图 2 | g00545458 |
G3608 发动机 |
- 卸下将壳体 (9) 固定在合适位置的螺栓。 卸下壳体。
Show/hide table
图 3 | g00545459 |
- 从壳体上卸下 O 形密封圈 (10) 。
- 拧松将叶轮 (11) 固定在合适位置的螺栓 (12) 。 不要将螺栓拆下来。
- 使用挡块和工具 (A) 使叶轮张紧。 轻敲缸体中心,松动轴上的叶轮 (11) 。
- 从轴 (14) 上卸下螺栓 (12) 、垫圈 (13) 和叶轮 (11) 。
- 从水泵上卸下弹簧 (15) 、碳晶密封件 (16) 以及陶瓷密封件 (17) 。
Caterpillar Information System:
3054 Engine for Caterpillar Built Machines Turbocharger - Disassemble
3054 Engine for Caterpillar Built Machines Turbocharger - Install
3054 Engine for Caterpillar Built Machines Turbocharger - Remove
3054 and 3056 Industrial and Generator Set Engines Fuel Injection Pump - Install
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Cooler - Install
3054 and 3056 Industrial and Generator Set Engines Fuel Injection Pump - Remove
3054 and 3056 Industrial and Generator Set Engines Fuel Injection Nozzles - Install
3054 and 3056 Industrial and Generator Set Engines Fuel Injection Nozzles - Remove
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Cooler - Remove
3054 Engine for Caterpillar Built Machines Fuel Injection Lines - Remove and Install
SR4 HV and SR4B HV Generators Glossary
3412E and C30 Marine Engines Front Power Take-Off (FPTO)
3054 Engine for Caterpillar Built Machines Turbocharger - Assemble
3054 and 3056 Industrial and Generator Set Engines Inlet Manifold - Remove
3612 and 3616 Fast Vessel Engines Hourly Performance Log
3606 and 3608 Engines Cooling System Operation
3054 and 3056 Industrial and Generator Set Engines Inlet Manifold - Install
3054 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
G3606 and G3608 Engines Water Pump Seal - Install
3612 and 3616 Fast Vessel Engines Engine Mounts - Check
3054 Engine for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
3412E and C30 Marine Engines Front Power Take-Off (FPTO)
3054 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump Drive - Remove