PRODUCT SUPPORT PROGRAM FOR REPLACING THE 167-3466 PRESSURE SWITCH WHICH MAY FAIL ON CERTAIN 320C FOREST MACHINES
Usage:
SEBE9238
June 29, 2005
U-212
D-166
O-175
Show/hide table
| before
or after failure |
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 167-3466 PRESSURE SWITCH WHICH MAY FAIL ON CERTAIN 320C FOREST MACHINES |
|
| 1408 1435 5057 |
PS41864
|
|
NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
TERMINATION DATE
June 30, 2007PROBLEM
The 167-3466 Pressure Switch may fail on certain 320C Forest Machines. The pressure switch is used in the hydraulic pilot circuit.AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 320C | SAH131-306
|
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 7 |
|
STRAP-CABLE |
| 1 |
|
RECEPTACLE |
| 1 |
|
PLUG-STOR |
| 1 | 3J1907 | SEAL-O-RING |
| 1 | 1495050 | RELAY |
| 1 | 1864574 | PLUG ASSEMBLY |
| 1 | 2510479 | HARNESS ASSEMBLY |
ACTION REQUIRED
Refer to Service Magazine SEPD0753, New Control Circuit Improves The Operation Of The Grapple, for the rework procedure.SERVICE CLAIM ALLOWANCES
Show/hide table
Product smu/age whichever comes first |
|
|
|
|||
Parts |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR REWORKING THE GRAPPLE RELAY ON CERTAIN 322C, 325C, AND 330C FOREST MACHINES PRODUCT SUPPORT PROGRAM FOR REWORKING THE GRAPPLE RELAY ON CERTAIN 322C, 325C, AND 330C FOREST MACHINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 6V6080 TORQUE MULTIPLIERS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 6V6080 TORQUE MULTIPLIERS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR INSPECTING/REPAIRING BOOM WELD CRACKS OR REPLACING THE BOOM ON CERTAIN M316C, M318C, AND M322C WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR INSPECTING/REPAIRING BOOM WELD CRACKS OR REPLACING THE BOOM ON CERTAIN M316C, M318C, AND M322C WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ENGINE BRACKET WHICH MAY BREAK ON CERTAIN 315C EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ENGINE BRACKET WHICH MAY BREAK ON CERTAIN 315C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING XT6-ES HOSES ON CERTAIN M300C WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING XT6-ES HOSES ON CERTAIN M300C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING XT5 HOSES ON CERTAIN M300 WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING XT5 HOSES ON CERTAIN M300 WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 169-5593 GEAR FROM THE FINAL DRIVE ON CERTAIN 320C, 322C, 325C, AND 325C L EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 169-5593 GEAR FROM THE FINAL DRIVE ON CERTAIN 320C, 322C, 325C, AND 325C L EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REFLASHING ENGINE SOFTWARE ON CERTAIN 924G, 928G, 930G WHEEL LOADERS, IT28G INTEGRATED TOOL CARRIERS, TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B, TH580B TELEHANDLERS, M313C, M315C, M316C, M318C, M32 PRODUCT IMPROVEMENT PROGRAM FOR REFLASHING ENGINE SOFTWARE ON CERTAIN 924G, 928G, 930G WHEEL LOADERS, IT28G INTEGRATED TOOL CARRIERS, TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B, TH580B TELEHANDLERS, M313C, M315C, M316C, M318C, M32
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN XT-5 REUSABLE STEM ASSEMBLIES-COLLET (3/4") AND HOSE ASSEMBLIES FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN XT-5 REUSABLE STEM ASSEMBLIES-COLLET (3/4") AND HOSE ASSEMBLIES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL INSTALLED PRODUCT LINK PL-102C AND REPLACING WITH PRODUCT LINK PL-121SR PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL INSTALLED PRODUCT LINK PL-102C AND REPLACING WITH PRODUCT LINK PL-121SR
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CONTROLLER FOR BOOM/BLADE SELECTION ON CERTAIN 312C L EXCAVATORS THAT ARE EQUIPPED WITH A BLADE PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CONTROLLER FOR BOOM/BLADE SELECTION ON CERTAIN 312C L EXCAVATORS THAT ARE EQUIPPED WITH A BLADE
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 137-5159 AND 137-5160 HOSES ON CERTAIN 322C, 325C, AND 330C FOREST MACHINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE 137-5159 AND 137-5160 HOSES ON CERTAIN 322C, 325C, AND 330C FOREST MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT AXLE PINION ON CERTAIN M300C SERIES WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT AXLE PINION ON CERTAIN M300C SERIES WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ECM�S FOR CERTAIN 345B EXCAVATORS AND 621G, 623G WHEEL TRACTOR SCRAPERS, 3176 ENGINE, D8R II TRACK TYPE TRACTOR, 740 ARTICULATED TRUCK PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ECM�S FOR CERTAIN 345B EXCAVATORS AND 621G, 623G WHEEL TRACTOR SCRAPERS, 3176 ENGINE, D8R II TRACK TYPE TRACTOR, 740 ARTICULATED TRUCK
PRODUCT IMPROVEMENT PROGRAM FOR VERIFYING THE 8T-4780 BOLT HAS NOT BECOME LOOSE ON CERTAIN M325C MATERIAL HANDLERS PRODUCT IMPROVEMENT PROGRAM FOR VERIFYING THE 8T-4780 BOLT HAS NOT BECOME LOOSE ON CERTAIN M325C MATERIAL HANDLERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 239-7166 HARNESS ASSEMBLY ON CERTAIN M325C MATERIAL HANDLERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 239-7166 HARNESS ASSEMBLY ON CERTAIN M325C MATERIAL HANDLERS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE PIN GRABBER QUICK COUPLER ON CERTAIN 345C EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE PIN GRABBER QUICK COUPLER ON CERTAIN 345C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR FLASHING NEW SOFTWARE IN ORDER TO PREVENT ENGINE OVERHEATING ON CERTAIN 320C AND 320C L EXCAVATORS PRODUCT SUPPORT PROGRAM FOR FLASHING NEW SOFTWARE IN ORDER TO PREVENT ENGINE OVERHEATING ON CERTAIN 320C AND 320C L EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A NEW WARNING FILM AND PROVIDING A NEW OPERATION AND MAINTENANCE MANUAL ON CERTAIN BH27, BH30, AND BH30W BACKHOE LOADER WORK TOOL FOR SKID STEER LOADERS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A NEW WARNING FILM AND PROVIDING A NEW OPERATION AND MAINTENANCE MANUAL ON CERTAIN BH27, BH30, AND BH30W BACKHOE LOADER WORK TOOL FOR SKID STEER LOADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW SWIVEL ACCESS PLATFORMS ON CERTAIN A SERIES TELEHANDLERS PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW SWIVEL ACCESS PLATFORMS ON CERTAIN A SERIES TELEHANDLERS
PRODUCT SUPPORT PROGRAM FOR VERIFYING THE TORQUE ON THE 227-6034 BOLTS FOR THE FINAL DRIVE GEAR COUPLING WHICH MAY BECOME LOOSE ON CERTAIN 320C EXCAVATORS PRODUCT SUPPORT PROGRAM FOR VERIFYING THE TORQUE ON THE 227-6034 BOLTS FOR THE FINAL DRIVE GEAR COUPLING WHICH MAY BECOME LOOSE ON CERTAIN 320C EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 233-3672 STUDS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 233-3672 STUDS FROM DEALER PARTS STOCK
Product Support Program For Replacing The Scavenge Oil Pump On Certain D11N and D11R Tractors; 776B, 776C, 776D, 777B, 777C, 777D, 784B, 784C, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, 793C, 797A, 797B Trucks; 854G Tractor; 992G, 994, 994D Wheel L Product Support Program For Replacing The Scavenge Oil Pump On Certain D11N and D11R Tractors; 776B, 776C, 776D, 777B, 777C, 777D, 784B, 784C, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, 793C, 797A, 797B Trucks; 854G Tractor; 992G, 994, 994D Wheel L
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE REAR CROSS BEAM ON 48 INCH CAB RISERS WHICH MAY CRACK ON CERTAIN 320C, 322C, 325C, AND 330C FOREST MACHINES PRODUCT SUPPORT PROGRAM FOR REPAIRING THE REAR CROSS BEAM ON 48 INCH CAB RISERS WHICH MAY CRACK ON CERTAIN 320C, 322C, 325C, AND 330C FOREST MACHINES