Camshaft - Remove
Show/hide table
所需工具 | |||
---|---|---|---|
工具 | 零件号 | 零件描述 | 数量 |
A | 131-1525 | 凸轮轴导向器 | 1 |
开始:
- 拆下摇臂轴组件和推杆。 请参阅拆解和组装, "摇臂轴和推杆 - 拆卸"。
- 拆下前盖。 请参阅拆解和组装, "前盖 - 拆卸"。
- 拆卸凸轮轴位置传感器。 请参阅拆解和组装, "凸轮轴位置传感器 - 拆卸和安装"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
注意 |
---|
在进行检验、保养、测试、调整及维修产品期间,必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。 有关收集和盛接 Cat 产品上油液的适用工具和用品,请参阅专门出版物, NENG2500, "代理商维修工具目录"。 按照当地法规和要求处置所有液体。 |
- 转动曲轴至 1 缸活塞压缩行程的上止点位置。 在飞轮上安装正时螺栓。 请参阅测试和调整, "找到 1 号活塞上止点位置"。
- 确保对准下列齿轮的正时标记:凸轮轴驱动齿轮, 惰轮 和 曲轴齿轮。
Show/hide table
图 1 g00529917 注: 为了拆下凸轮轴,没有必要拆卸缸盖。
- 用铁丝将气门挺杆与凸轮轴分离。 请参阅图 1。
Show/hide table
图 2 g00813405 - 拆下止推销 (1) 。
- 将工具 (A) 安装到凸轮轴 (2) 中。
注: 润滑工具 (A) 以便更易于拆下凸轮轴。 润滑还防止损坏凸轮轴凸轮和凸轮轴轴承。
- 小心地从发动机上拆下凸轮轴 (2)。
Caterpillar Information System:
3406E On-Highway Engine BrakeSaver - Disassemble
P16, P20, P25, P28, P40 and P60 Pulverizers Rotary Manifold - Remove
C-10 and C-12 Engines Gear Group (Front) - Install
3500 Spark Ignited Engines Cylinder Head
3406E On-Highway Engine Fuel Transfer Pump - Install
P16, P20, P25, P28, P40 and P60 Pulverizers Gerotor Motor - Remove
C-10 and C-12 Engines Gear Group (Front) - Remove
3176C and 3196 Engines For Caterpillar Built Machines Connecting Rod Bearings - Install
3176C and 3196 Engines For Caterpillar Built Machines Connecting Rod Bearings - Remove
3406E On-Highway Engine Engine Oil Pump - Assemble
G3500B Engines Cylinder Head Valves
3176C and 3196 Industrial Engines Compression Brake - Install
3406E On-Highway Engine BrakeSaver Engine Oil Pump - Disassemble
3406E On-Highway Engine BrakeSaver Engine Oil Pump - Assemble
3176C and 3196 Industrial Engines Compression Brake - Disassemble
3406E On-Highway Engine BrakeSaver - Assemble
Electronic Modular Control Panel II+ (EMCP II+) Instrument Panel - For 3306B and 3406C MUI Engines
3406E On-Highway Engine BrakeSaver Engine Oil Pan - Remove and Install
G3406 Engine Manual Stop Procedure
G3300 Engines Reference Material
3176C and 3196 Industrial Engines Compression Brake - Assemble
3114, 3116 and 3126 MUI Engine Governors Governor (Type VII)
P16, P20, P25, P28, P40 and P60 Pulverizers Relief Valve (Gerotor) - Remove and Install
3406C (PEEC III) Truck Engines Electrical System