PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE MACHINE CONTROLLER ON CERTAIN 330D EXCAVATORS
Usage:
REBE1117-00
Show/hide table
15Aug2006 |
U-590
A-574
D-563
Show/hide table
Priority | PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE MACHINE CONTROLLER ON CERTAIN 330D EXCAVATORS |
|
7490 7610 7620 1263 | PI31133 |
Show/hide table
NOTE: | This Program must be administered as soon as possible. When reporting the repair, use "PI31133" as the Part Number and "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. Exception: If the repair is done after failure, use "PI31133" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
COMPLETION DATE |
TERMINATION DATE |
28Feb2007 | 31Aug2007 |
PROBLEM
Show/hide table
The machine controller needs to be reworked on certain 330D Excavators. The existing machine controller can indicate incorrect information for water separator level sensor. |
AFFECTED PRODUCT
Show/hide table
Model | Identification Number |
330D | NBD00153-00159, 162-164, 171, 173-174, 177-200, 202-208 |
PARTS NEEDED
Show/hide table
No parts needed for this program |
ACTION REQUIRED
Show/hide table
See the attached Rework Procedure. |
Show/hide table
OWNER NOTIFICATION
Show/hide table
U.S. and Canadian owners will receive the attached Owner Notification. |
SERVICE CLAIM ALLOWANCES
Show/hide table