PRODUCT SUPPORT PROGRAM FOR REPAIRING THE REACH BOOM WHICH MAY CRACK ON CERTAIN 345C EXCAVATORS
Usage:
REBE1143-00
Show/hide table
| 09Aug2006 |
| B170 |
Show/hide table
| After Failure Only (Limited distribution) | PRODUCT SUPPORT PROGRAM FOR REPAIRING THE REACH BOOM WHICH MAY CRACK ON CERTAIN 345C EXCAVATORS |
|
| 6501 | PS51218 |
|
Show/hide table
| NOTE: | This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS51218" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Aug2007 |
PROBLEM
Show/hide table
| The 2285415/">228-5415 Reach Boom may crack and need to be replaced on certain 345C Excavators. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 345C | PJW00791 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | 2285415 | BOOM AS-BRG & |
ACTION REQUIRED
Show/hide table
| If the reach boom has cracked, replace the 2285415/">228-5415 Reach Boom with a new 2285415/">228-5415 Reach Boom. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
0-18 mo |
||||||
Show/hide table
| NOTE: This is a 12.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Contact David Wagner (630-859-5925) for instructions on returning the failed boom. |
Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR REPAIRING HEAD SEAL-RELATED FAILURES FOR THE STICK CYLINDER ON CERTAIN 330D EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPAIRING HEAD SEAL-RELATED FAILURES FOR THE STICK CYLINDER ON CERTAIN 330D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR CHANGING TWO PORTS ON THE MEDIUM PRESSURE SWIVEL ON CERTAIN M300C-SERIES WHEELED EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR CHANGING TWO PORTS ON THE MEDIUM PRESSURE SWIVEL ON CERTAIN M300C-SERIES WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE MACHINE CONTROLLER ON CERTAIN 330D EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE MACHINE CONTROLLER ON CERTAIN 330D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MATERIAL HANDLER FRONT STRUCTURES ON CERTAIN 365B, 365BL, 365B Series II, AND 375L MATERIAL HANDLERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE MATERIAL HANDLER FRONT STRUCTURES ON CERTAIN 365B, 365BL, 365B Series II, AND 375L MATERIAL HANDLERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING THE FUEL LINES ON CERTAIN 323D EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING THE FUEL LINES ON CERTAIN 323D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE BOOMS AND GREASE LINES ON CERTAIN M325C AND M325D EXCAVATORS THAT ARE EQUIPPED FOR MATERIAL HANDLING APPLICATION PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE BOOMS AND GREASE LINES ON CERTAIN M325C AND M325D EXCAVATORS THAT ARE EQUIPPED FOR MATERIAL HANDLING APPLICATION
Product Support Program for the installation of an Additional Isolation Valve to Prevent Bucket Cylinder Drift on certain 301.5, 301.6, 301.6C, 301.8, 301.8C, 302.5, and 302.5C Excavators Product Support Program for the installation of an Additional Isolation Valve to Prevent Bucket Cylinder Drift on certain 301.5, 301.6, 301.6C, 301.8, 301.8C, 302.5, and 302.5C Excavators
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
PRODUCT SUPPORT PROGRAM FOR REWORKING THE LATCH ON THE LEFT SIDE ENGINE ENCLOSURE DOOR ON CERTAIN 302.5C MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE LATCH ON THE LEFT SIDE ENGINE ENCLOSURE DOOR ON CERTAIN 302.5C MINI HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR RELOCATING THE BOOM ACCUMULATORS ON CERTAIN M325C MH AND M325D MH EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR RELOCATING THE BOOM ACCUMULATORS ON CERTAIN M325C MH AND M325D MH EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING THE CONTROL FILM INSTRUCTION ON CERTAIN 323D, 324D, 325D, AND 330D EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING THE CONTROL FILM INSTRUCTION ON CERTAIN 323D, 324D, 325D, AND 330D EXCAVATORS
Product Support Program for repairing head seal-related failures for the stick cylinder on certain 330D excavators Product Support Program for repairing head seal-related failures for the stick cylinder on certain 330D excavators
PRODUCT SUPPORT PROGRAM FOR REWORKING THE BOOM LOWERING CHECK VALVE (BLCV) ON CERTAIN 320C, 322C, 325C, 330C, 330CL, 345BL SERIES II EXCAVATORS AND M325C MATERIAL HANDLERS PRODUCT SUPPORT PROGRAM FOR REWORKING THE BOOM LOWERING CHECK VALVE (BLCV) ON CERTAIN 320C, 322C, 325C, 330C, 330CL, 345BL SERIES II EXCAVATORS AND M325C MATERIAL HANDLERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A NEW POLYCARBONATE WINDSHIELD ON CERTAIN 320C L EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A NEW POLYCARBONATE WINDSHIELD ON CERTAIN 320C L EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING TWO PLUGS FROM THE HYDRAULIC OIL COOLER FAN MOTOR ON CERTAIN 385C EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REMOVING TWO PLUGS FROM THE HYDRAULIC OIL COOLER FAN MOTOR ON CERTAIN 385C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BUCKET BASE EDGE ADAPTER ON CERTAIN 320C AND 320C L EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE BUCKET BASE EDGE ADAPTER ON CERTAIN 320C AND 320C L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REMOVING TWO PLUGS FROM THE HYDRAULIC OIL COOLER FAN MOTOR ON CERTAIN 385B AND 5090B EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REMOVING TWO PLUGS FROM THE HYDRAULIC OIL COOLER FAN MOTOR ON CERTAIN 385B AND 5090B EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING TWO PLUGS FROM THE HYDRAULIC FAN MOTOR ON CERTAIN 330D EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REMOVING TWO PLUGS FROM THE HYDRAULIC FAN MOTOR ON CERTAIN 330D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW ENGINE ECM SOFTWARE ON CERTAIN OEM MOBILE HYDRAULIC POWER UNITS EQUIPPED WITH C9 ENGINE RATING SOFTWARE PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW ENGINE ECM SOFTWARE ON CERTAIN OEM MOBILE HYDRAULIC POWER UNITS EQUIPPED WITH C9 ENGINE RATING SOFTWARE
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC ROTATOR ON CERTAIN GSH22 ORANGE PEEL GRAPPLES PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC ROTATOR ON CERTAIN GSH22 ORANGE PEEL GRAPPLES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTATOR GROUP ON CERTAIN VRG20/2-VRG25/2 G310B-G315B DEMOLITION AND SORTING GRAPPLES PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTATOR GROUP ON CERTAIN VRG20/2-VRG25/2 G310B-G315B DEMOLITION AND SORTING GRAPPLES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CONTROL FILMS ON THE RIGHT-SIDE CAB WINDOW ON CERTAIN 365C AND 385C MATERIAL HANDLING EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CONTROL FILMS ON THE RIGHT-SIDE CAB WINDOW ON CERTAIN 365C AND 385C MATERIAL HANDLING EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 234-9470 TIMER RELAY ON CERTAIN 315C, 322C, 325C, 330C AND M325C EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 234-9470 TIMER RELAY ON CERTAIN 315C, 322C, 325C, 330C AND M325C EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 247-9035 HOSE ASSEMBLY ON CERTAIN 320D AND 323D EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 247-9035 HOSE ASSEMBLY ON CERTAIN 320D AND 323D EXCAVATORS