PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Caterpillar


Hydraulic Cylinder

Usage:

PM825 3C6


Illustration 1g06362233

Table 1
Item  Qty  Part  Specification Description 
D1  Diameter of rod is 50 mm (2.0 inch)
D2  Bore of cylinder is 120 mm (4.7 inch)
Length of cylinder extended is 1785 mm (70.3 inch)
Length of cylinder retracted is 1728 mm (68.0 inch)
Stroke of cylinder is 57 mm (2.2 inch)

Caterpillar Information System:

PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Operator Console
Special Instructions are Now Available for Retrofitting Hydraulic Hose Clamping on Certain Compact Track Loaders,Multi Terrain Loaders, and Skid Steer Loaders {5057} Special Instructions are Now Available for Retrofitting Hydraulic Hose Clamping on Certain Compact Track Loaders,Multi Terrain Loaders, and Skid Steer Loaders {5057}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Operator Console
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Operator Console
789D CMD Off-Highway Truck Chassis Electronic Control System (Command For Hauling) System Schematic
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Fuel System Primary Filter (Water Separator) - Drain
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Operator Console
Hydraulic Hose Assembly May Leak on Certain 424B, 424B HD, 424B2, and 426 F2 Backhoe Loaders {5057} Hydraulic Hose Assembly May Leak on Certain 424B, 424B HD, 424B2, and 426 F2 Backhoe Loaders {5057}
Rework Procedure for Weld Crack on A-Pin Doubler Plate for Certain 966L, 966M, 972L, and 972M Medium Wheel Loaders {0679, 7054} Rework Procedure for Weld Crack on A-Pin Doubler Plate for Certain 966L, 966M, 972L, and 972M Medium Wheel Loaders {0679, 7054}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Operator Console
988K XE Wheel Loader STIC Control (Steering Deadband) - Adjust
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Operator Console
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Hydraulic Cylinder
Certain Cat® Product Link (PL542) Devices Are Not Registering in Cat Connect Digital Services (CCDS) and Cannot Be Subscribed in Dealer Service Portal (DSP) {7606} Certain Cat® Product Link (PL542) Devices Are Not Registering in Cat Connect Digital Services (CCDS) and Cannot Be Subscribed in Dealer Service Portal (DSP) {7606}
Certain Cat® Product Link Device Equipment Data Is Not Updated and May Cause Subscription Issue {7606} Certain Cat® Product Link Device Equipment Data Is Not Updated and May Cause Subscription Issue {7606}
Unable to View Snapshots in Cat® Product Link Web {7606} Unable to View Snapshots in Cat® Product Link Web {7606}
An Improved Rear Pump drive Bolt Used on Certain 994K Wheel Loaders {3108} An Improved Rear Pump drive Bolt Used on Certain 994K Wheel Loaders {3108}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Air Cleaner
The Slack Adjuster Group May Fail on Certain 770G, 772G, 773G, and 775G Off-Highway Trucks {4261} The Slack Adjuster Group May Fail on Certain 770G, 772G, 773G, and 775G Off-Highway Trucks {4261}
Installation of Aftermarket Seatbelt Alert kit on Caterpillar<SUB>&reg;</SUB> 773D and 777D Off-Highway Trucks {1408, 7327, 7400} Installation of Aftermarket Seatbelt Alert kit on Caterpillar<SUB>&reg;</SUB> 773D and 777D Off-Highway Trucks {1408, 7327, 7400}
Cat&reg; Object Detection Software Update Is Now Available for Certain Soil Compactors, Wheel Dozers, and Wheel Loaders {1439, 7347, 7348, 7490, 7610, 7620} Cat&reg; Object Detection Software Update Is Now Available for Certain Soil Compactors, Wheel Dozers, and Wheel Loaders {1439, 7347, 7348, 7490, 7610, 7620}
Improved Transmission Hose Routing is Used on Certain 994K Wheel Loaders {3016, 3154} Improved Transmission Hose Routing is Used on Certain 994K Wheel Loaders {3016, 3154}
New Orifices to Reduce the Speed of Hydraulic End-gates are Now Available for certain SE50VT and SE60VT XW Asphalt Screeds {5479} New Orifices to Reduce the Speed of Hydraulic End-gates are Now Available for certain SE50VT and SE60VT XW Asphalt Screeds {5479}
Rework Procedure for Heater Hold Down on Certain SE50 V Asphalt Screeds {1408} Rework Procedure for Heater Hold Down on Certain SE50 V Asphalt Screeds {1408}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.