Improved PL Ready Harness Is Now Available for Certain Cat® Product Link PL542 Devices {7606} Caterpillar


Improved PL Ready Harness Is Now Available for Certain Cat® Product Link PL542 Devices {7606}

Usage:

- PL5
Machine Control and Guidance Products
PRODUCT LINK (S/N: PL51-UP)

An improved PL ready harness is now available for certain Cat® Product Link PL542 devices that are listed above. The improved 532-5452 Wiring Harness (change level 01) includes the proper receptacle needed on the machine side and can be used immediately.

To correct any 532-5452 Wiring Harness (change level 00) in inventory. Order 102-8801 Receptacle Kit and replace the C1 connector with 3E-5179 Connector Receptacle As.

Perform the below steps for replacing the C1 connector:



    Illustration 1g06321465
    PL ready connector with incorrect end

  1. Remove all six wires from the C1 connector using the appropriate tool.

  2. Cut off the existing wire sockets.


    Illustration 2g06321466
    PL ready connector with proper end

  3. Strip the ends of the wires and install pin as required.


    Illustration 3g06321496
    PL542 connector pin out

  4. Insert the six wires into receptacle 3E-5179 Connector Receptacle As. Refer to Illustration 3 for PL542 connector pin out.

Caterpillar Information System:

S3015, S3025 and S3035 Demolition and Scrap Shears Swivel Leakage - Test
The Hydraulic Oil Lines Group is Improved on Certain 797 Off-Highway Trucks {3101} The Hydraulic Oil Lines Group is Improved on Certain 797 Off-Highway Trucks {3101}
24 Motor Graders Engine Supplement Turbocharger - Remove and Install - Right Side
24 Motor Graders Engine Supplement Turbocharger - Remove and Install - Left Side
A New Hose Assembly is Now Used in the Automatic Lubrication Group on Certain 777E Off-Highway Trucks {7510, 7540} A New Hose Assembly is Now Used in the Automatic Lubrication Group on Certain 777E Off-Highway Trucks {7510, 7540}
Base Edge Center on Fusion Buckets May Bow on Certain Medium Wheel Loaders {6001, 6101, 6801} Base Edge Center on Fusion Buckets May Bow on Certain Medium Wheel Loaders {6001, 6101, 6801}
S3015, S3025 and S3035 Demolition and Scrap Shears Control Valve Pressure (Hydraulic Rotator) - Test
S3015, S3025 and S3035 Demolition and Scrap Shears Hydraulic Cylinder Leakage - Test
S3015, S3025 and S3035 Demolition and Scrap Shears Speed Control Valve (Hydraulic Cylinder) - Test and Adjust
S3015, S3025 and S3035 Demolition and Scrap Shears Hydraulic Rotator Cycle Time - Check
Diesel Exhaust Fluid (DEF) Pump Filter Maintenance Interval On Certain C4.4 Engines {1000, 108J, 7000} Diesel Exhaust Fluid (DEF) Pump Filter Maintenance Interval On Certain C4.4 Engines {1000, 108J, 7000}
S3015, S3025 and S3035 Demolition and Scrap Shears Hydraulic System Air - Purge
Asset Serial Numbers May Be Missing Universal Customer Identification (UCID) In Back-Office Database On Certain Cat® Product Link Devices {7490, 7606, 7610, 7620} Asset Serial Numbers May Be Missing Universal Customer Identification (UCID) In Back-Office Database On Certain Cat® Product Link Devices {7490, 7606, 7610, 7620}
Diesel Exhaust Fluid (DEF) Pump Filter Maintenance Interval On Certain C4.4 Machine Engines {1000, 108J, 7000} Diesel Exhaust Fluid (DEF) Pump Filter Maintenance Interval On Certain C4.4 Machine Engines {1000, 108J, 7000}
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Piston Pump (Steering) Margin Pressure - Test and Adjust
A Procedure to Replace Windscreen Is Now Available for Certain 740 Ejector and 745 Articulated Trucks {7310, 7340} A Procedure to Replace Windscreen Is Now Available for Certain 740 Ejector and 745 Articulated Trucks {7310, 7340}
Installation Instructions for the 4x4 Turbocharger Configuration for Certain 797F Off-Highway Truck Engines {0635, 1052, 1053, 1059, 108U, 1209, 1307, 1380, 1803, 5502} Installation Instructions for the 4x4 Turbocharger Configuration for Certain 797F Off-Highway Truck Engines {0635, 1052, 1053, 1059, 108U, 1209, 1307, 1380, 1803, 5502}
New Brake Components Are Now Used on Certain 416F2 and 420F2 Backhoe Loaders {3278, 3282} New Brake Components Are Now Used on Certain 416F2 and 420F2 Backhoe Loaders {3278, 3282}
Operator Joystick Control Functions May Become Intermittent on Certain 521B, 522B, 541 Series 2 and 552 Series 2 Track Feller Bunchers {1408, 5063, 5705} Operator Joystick Control Functions May Become Intermittent on Certain 521B, 522B, 541 Series 2 and 552 Series 2 Track Feller Bunchers {1408, 5063, 5705}
Blower Motor May Fail On Certain F2 Series Backhoe Loaders {7304, 7309, 7320, 7337} Blower Motor May Fail On Certain F2 Series Backhoe Loaders {7304, 7309, 7320, 7337}
New Support Brackets for Exhaust Manifold Group are Now Used on Certain Off Highway Trucks {1059} New Support Brackets for Exhaust Manifold Group are Now Used on Certain Off Highway Trucks {1059}
S3015, S3025 and S3035 Demolition and Scrap Shears Rotator Motor and Manifold
24 Motor Grader Machine Systems Control Manifold (Fan) - Remove and Install
24 Motor Grader Machine Systems Gerotor Motor (Circle Drive) - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.