PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Caterpillar


Frame

Usage:

PM825 3C6


Illustration 1g06251448

Table 1
Item  Qty  Part  Specification Description 
515-2122 Flange  Before assembly, apply Loctite 5188 as required to the gasket side mating of water tank outer surface only. 
399-8204 Gasket  Before assembly, apply Loctite 5188 as required to the gasket side mating of water tank outer surface only. 
12  8T-4196 Bolt  Before assembly, apply blue Loctite 243 to threads.
Torque to 30 ± 7 N·m (266 ± 625 lb in) in a criss-cross pattern. 
8T-4196 Bolt  Before assembly, apply blue Loctite 243 to threads. 

Caterpillar Information System:

PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Electronic Control Module
Cat® Product Link Elite (PLE601) Network Managers are Not Communicating with Allen Bradley Panels After Firmware Update {0115, 449C} Cat® Product Link Elite (PLE601) Network Managers are Not Communicating with Allen Bradley Panels After Firmware Update {0115, 449C}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Swing Cylinder Lines
New High Strength Bolts Now Used on the Spindle to Brake Housing Joint and the Brake Housing to Brake Anchor Joint on R2900, R2900G, and R3000H Load Haul Dump Machines {4001, 4251} New High Strength Bolts Now Used on the Spindle to Brake Housing Joint and the Brake Housing to Brake Anchor Joint on R2900, R2900G, and R3000H Load Haul Dump Machines {4001, 4251}
CS54B, CP54B and CS64B Vibratory Soil Compactors Machine Electronic Control System Speed Sensor - Test
CS54B, CP54B and CS64B Vibratory Soil Compactors Machine Electronic Control System Speed Sensor (Dual Signal) - Test
CS54B, CP54B and CS64B Vibratory Soil Compactors Machine Electronic Control System CAN Data Link - Test
A Procedure to Improve the ATAAC Tubes on Certain 797 and 797B Off-Highway Trucks is Available {1071} A Procedure to Improve the ATAAC Tubes on Certain 797 and 797B Off-Highway Trucks is Available {1071}
Procedure to Improve the ATAAC Tubes on Certain 797 and 797B Off-Highway Trucks {1071} Procedure to Improve the ATAAC Tubes on Certain 797 and 797B Off-Highway Trucks {1071}
CB13, CB15 and CB16 Asphalt Compactor Machine Systems Relief Valve (Main, Vibratory) - Test and Adjust
CB13, CB15 and CB16 Asphalt Compactor Propel Systems Relief Valve (Charge) - Test and Adjust
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Gear and Bearing - Remove and Install
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Pump Lines - Auxiliary
Improved Fastening Method Is Now Used to Secure the Truck Body Group Mounting Pin Assembly on Certain 700 C-Series Articulated Trucks {7250, 7258} Improved Fastening Method Is Now Used to Secure the Truck Body Group Mounting Pin Assembly on Certain 700 C-Series Articulated Trucks {7250, 7258}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Return Lines
New Digital Voltage Regulator (DVR) Is Now Available {1410, 7620} New Digital Voltage Regulator (DVR) Is Now Available {1410, 7620}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Rotor
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Rotor
Improved Installation Torque for Brake Accumulator Mounting Group Is Now Used on Certain 700 C-Series Articulated Trucks {4257, 4263} Improved Installation Torque for Brake Accumulator Mounting Group Is Now Used on Certain 700 C-Series Articulated Trucks {4257, 4263}
Suction Fan Assembly and Hub May Come Out from the Piston Motor Group During Operation on Certain Wheel Feller Bunchers and Wheel Skidders {1356, 1360} Suction Fan Assembly and Hub May Come Out from the Piston Motor Group During Operation on Certain Wheel Feller Bunchers and Wheel Skidders {1356, 1360}
CS54B, CP54B and CS64B Vibratory Soil Compactors Machine Electronic Control System Solenoid Valve - Test
988K XE Wheel Loader Power Train Axle Oil Cooler Pump and Motor - Remove and Install
CB1.7 and CB1.8 Utility Compactors Safety Messages
Procedure to Install Hopper and Auger Valve on Certain AP300F and AP355F Asphalt Pavers {5051} Procedure to Install Hopper and Auger Valve on Certain AP300F and AP355F Asphalt Pavers {5051}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.