Screed Plate
Show/hide table
| |
| Illustration 1 | g06235533 |
|
Top view | |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| 1 | 10 | 448-9445 Stud | Use the following procedure to install the stud: 1. Before installing the stud in screed plate, apply red Loctite 272 to threads. 2. Assemble shorter threaded end of studs into screed plates. 3. Torque to |
| 2 | 2 | 466-7321 Sensor Mounting | Use the following procedure to install the sensor mounting, 1. Before installing the sensor mounting in screed plate, apply red Loctite 272 to threads. 2. Install sensor mounting into screed plate so bottom surface of sensor mounting is in contact with top surface of screed plate. 3. Torque to |
| 3 | 2 | 350-7866 Stud | Use the following procedure to install the stud, 1. Before installing the stud in screed plate, apply red Loctite 272 to threads. 2. Assemble shorter threaded end of studs into screed plates. 3. Torque to |
| 4 | 10 | 419-4908 Stud | Use the following procedure to install the stud, 1. Before installing the stud in screed plate, apply red Loctite 272 to threads. 2. Assemble shorter threaded end of studs into screed plates. 3. Torque to |
Caterpillar Information System:
785G Off-Highway Truck Breather (DEF Tank) - Replace
Procedure to Relocate the AC Pressure Switch on 777D Off Highway Trucks {1808} Procedure to Relocate the AC Pressure Switch on 777D Off Highway Trucks {1808}
Procedure to Relocate the Air Conditioning Pressure Switch on Certain 777E Off-Highway Trucks {1808} Procedure to Relocate the Air Conditioning Pressure Switch on Certain 777E Off-Highway Trucks {1808}
Procedure to Relocate the Air Conditioning Pressure Switch on Certain 773E Off-Highway Trucks {1808} Procedure to Relocate the Air Conditioning Pressure Switch on Certain 773E Off-Highway Trucks {1808}
Procedure to Install a Coupler Lines Kit on Certain Backhoe Loaders {5057} Procedure to Install a Coupler Lines Kit on Certain Backhoe Loaders {5057}
MD6200 Rotary Drill Restricted Visibility
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending In Cylinder Pressure Is Low
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending In Cylinder Pressure Is High
The Brake Charging Section of the Gear Pump Group May Fail on Certain 773G and 775G Off-Highway Trucks {5073} The Brake Charging Section of the Gear Pump Group May Fail on Certain 773G and 775G Off-Highway Trucks {5073}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805} Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
785G Off-Highway Truck Torque Converter and Transmission Oil Sample - Obtain
CW12 Pneumatic Compactor Machine Systems Steering Frame Lock - Separate and Connect
SE60 VT XW and SE60 V XW Asphalt Screed Machine Systems Screed Plate
Regulatory Compliance Information Radio Detection and Ranging (Radar) - C6 Radar - If Equipped
An Alternative Cab Mount Assembly is Now Available for Certain C-Series Articulated Trucks Equipped with 139-4593 Rollover Protective Structure (ROPS) Mounting Group {7266, 7301} An Alternative Cab Mount Assembly is Now Available for Certain C-Series Articulated Trucks Equipped with 139-4593 Rollover Protective Structure (ROPS) Mounting Group {7266, 7301}
MD6200 Rotary Drill Operation
Reuse and Salvage Guideline on 794 AC and 795F AC/XQ Retarder Group {1437, 1627, 3121, 425R} Reuse and Salvage Guideline on 794 AC and 795F AC/XQ Retarder Group {1437, 1627, 3121, 425R}
MD6310 Rotary Drill Battery Disconnect Switch
SE50 VT Asphalt Screed Screed Plate
SE50 VT Asphalt Screed Screed Plate
24 Motor Graders Refrigerant Compressor
834K Wheel Dozer Systems and 836K Landfill Compactor Systems Pressure Switch - Differential
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Pressure Switch - Oil Filter Bypass
SE50 VT Asphalt Screed Screed Frame