The Brake Charging Section of the Gear Pump Group May Fail on  Certain 773G and 775G Off-Highway Trucks {5073} Caterpillar


The Brake Charging Section of the Gear Pump Group May Fail on  Certain 773G and 775G Off-Highway Trucks {5073}

Usage:

773G JWS
Quarry Truck
773G (S/N: MWH1-UP; JWS1-UP; T5S126-UP; T5T1-UP)
775G (S/N: T5F103-UP; RFM1-UP; MJS1-UP; T5W1-UP)

Introduction

The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.

Problem

455-9313 Gear Pump Gp (Brake Charging Section) in 513-8326 Gear Pump Gp and 455-9314 Gear Pump Gp (Brake Charging Section) in 513-8327 Gear Pump Gp may have premature bushing failure. This failure causes an increase in low brake pressure alarms.

Solution

Caterpillar is aware of this problem, but an interim repair has not yet been defined.

If you have experienced this problem, refer to the following information.

  • Submit a Dealer Solution Network (DSN) ticket quoting CPI number 359825.

  • Request that the Tier 1 representative, transfer your ticket to an available Tier 2 representative for Hydraulics.

  • The Tier 2 representative will request a solution for the particular failure.

Caterpillar Information System:

Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805} Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
785G Off-Highway Truck Torque Converter and Transmission Oil Sample - Obtain
CW12 Pneumatic Compactor Machine Systems Steering Frame Lock - Separate and Connect
D11T Track-Type Tractor Fire Suppression System - If Equipped
Procedure to Synchronize G610 Monitor Display Time with NTP Server on Certain Cat® Terrain for Drilling Applications {7490, 7607, 7610, 7620} Procedure to Synchronize G610 Monitor Display Time with NTP Server on Certain Cat® Terrain for Drilling Applications {7490, 7607, 7610, 7620}
Procedure to Synchronize G610 Monitor Display Time with On-Board Receiver on Certain Terrain for Grading & Loading Applications {7610, 7620} Procedure to Synchronize G610 Monitor Display Time with On-Board Receiver on Certain Terrain for Grading & Loading Applications {7610, 7620}
Procedure to Install a Wall Flow Diesel Particulate Filter Now Available for R2900G and R3000H Load Haul Dump Machines Equipped with Ventilation Reduction Package {1061, 1089, 108F, 1408, 7000, 7490, 7610, 7620} Procedure to Install a Wall Flow Diesel Particulate Filter Now Available for R2900G and R3000H Load Haul Dump Machines Equipped with Ventilation Reduction Package {1061, 1089, 108F, 1408, 7000, 7490, 7610, 7620}
Improved Front Wheel Group Bearings are Now Used on Certain 785 and 789 Off-Highway Trucks {4006, 4201, 4205, 7551} Improved Front Wheel Group Bearings are Now Used on Certain 785 and 789 Off-Highway Trucks {4006, 4201, 4205, 7551}
785G Off-Highway Truck Transmission Oil Filter - Replace - Charge Filter
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder - Remove and Install - Rear Door
CW12 Pneumatic Compactor Engine Supplement Expansion Tank - Remove and Install
PM310, PM312, PM313, PM620, PM622, PM820, PM822, and PM825 Cold Planer Monitoring System/Grade and Slope Grade and Slope
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending In Cylinder Pressure Is High
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending In Cylinder Pressure Is Low
MD6200 Rotary Drill Restricted Visibility
Procedure to Install a Coupler Lines Kit on Certain Backhoe Loaders {5057} Procedure to Install a Coupler Lines Kit on Certain Backhoe Loaders {5057}
Procedure to Relocate the Air Conditioning Pressure Switch on Certain 773E Off-Highway Trucks {1808} Procedure to Relocate the Air Conditioning Pressure Switch on Certain 773E Off-Highway Trucks {1808}
Procedure to Relocate the Air Conditioning Pressure Switch on Certain 777E Off-Highway Trucks {1808} Procedure to Relocate the Air Conditioning Pressure Switch on Certain 777E Off-Highway Trucks {1808}
Procedure to Relocate the AC Pressure Switch on 777D Off Highway Trucks {1808} Procedure to Relocate the AC Pressure Switch on 777D Off Highway Trucks {1808}
785G Off-Highway Truck Breather (DEF Tank) - Replace
SE50 VT Asphalt Screed Screed Plate
SE60 VT XW and SE60 V XW Asphalt Screed Machine Systems Screed Plate
Regulatory Compliance Information Radio Detection and Ranging (Radar) - C6 Radar - If Equipped
An Alternative Cab Mount Assembly is Now Available for Certain C-Series Articulated Trucks Equipped with 139-4593 Rollover Protective Structure (ROPS) Mounting Group {7266, 7301} An Alternative Cab Mount Assembly is Now Available for Certain C-Series Articulated Trucks Equipped with 139-4593 Rollover Protective Structure (ROPS) Mounting Group {7266, 7301}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.