SE50 VT Asphalt Screed Caterpillar


Screed Frame

Usage:

SE50 VT B86


Illustration 1g06236094

Table 1
Item  Qty  Part  Specification Description 
528-3259 Sleeve Bearing  Bore before assembly is 40.105 ± 0.025 mm (1.5789 ± 0.0010 inch)
512-1757 Pin  Diameter is 29.850 ± 0.025 mm (1.1752 ± 0.0010 inch)
40  329-3356 Nut  Torque to 50 ± 10 N·m (37 ± 7 lb ft)
8T-4200 Bolt  Before assembly, apply red Loctite 272 to the threads. 

Caterpillar Information System:

745 and 740 GC & 740 EJECTOR Articulated Truck Systems Pressure Switch - Oil Filter Bypass
834K Wheel Dozer Systems and 836K Landfill Compactor Systems Pressure Switch - Differential
24 Motor Graders Refrigerant Compressor
SE50 VT Asphalt Screed Screed Plate
SE50 VT Asphalt Screed Screed Plate
MD6310 Rotary Drill Battery Disconnect Switch
Reuse and Salvage Guideline on 794 AC and 795F AC/XQ Retarder Group {1437, 1627, 3121, 425R} Reuse and Salvage Guideline on 794 AC and 795F AC/XQ Retarder Group {1437, 1627, 3121, 425R}
MD6200 Rotary Drill Operation
An Alternative Cab Mount Assembly is Now Available for Certain C-Series Articulated Trucks Equipped with 139-4593 Rollover Protective Structure (ROPS) Mounting Group {7266, 7301} An Alternative Cab Mount Assembly is Now Available for Certain C-Series Articulated Trucks Equipped with 139-4593 Rollover Protective Structure (ROPS) Mounting Group {7266, 7301}
Regulatory Compliance Information Radio Detection and Ranging (Radar) - C6 Radar - If Equipped
SE60 VT XW and SE60 V XW Asphalt Screed Machine Systems Screed Plate
SE50 VT Asphalt Screed Screed Plate
994K Wheel Loader Exhaust Outlet Nitrogen Oxide Sensor - Replace - Emission Related Component
994K Wheel Loader Exhaust Inlet Nitrogen Oxide Sensor - Replace - Emission Related Component
CW12 Pneumatic Compactor Machine Systems Water Spray Pump - Remove and Install
793F and 797F Off-Highway Trucks Chassis Electronic Control System Wiring Harness (Open Circuit) - Test
793F and 797F Off-Highway Trucks Chassis Electronic Control System Wiring Harness (Short Circuit) - Test
793F and 797F Off-Highway Trucks Chassis Electronic Control System General Information
793F and 797F Off-Highway Trucks Chassis Electronic Control System Service Tools
CW12 Pneumatic Compactor Machine Systems Hydraulic Oil Filter - Remove and Install
New Software Is Now Used on Certain 420F2 Backhoe Loaders {7620} New Software Is Now Used on Certain 420F2 Backhoe Loaders {7620}
Improved Front Standard Wheel Group Bearings for Certain 793 Off-Highway Trucks are Now Available {4006, 4205, 7551} Improved Front Standard Wheel Group Bearings for Certain 793 Off-Highway Trucks are Now Available {4006, 4205, 7551}
Procedure to Improve Routing of Brake Cooling Lines on Certain 793D Off-Highway Trucks With Standard Wheel Arrangements {1374, 1380, 5057} Procedure to Improve Routing of Brake Cooling Lines on Certain 793D Off-Highway Trucks With Standard Wheel Arrangements {1374, 1380, 5057}
A Procedure to Improve Routing of Brake Cooling Lines on Certain 793D Off-Highway Trucks With Standard Wheel Arrangements is Available {1374, 1380, 5057} A Procedure to Improve Routing of Brake Cooling Lines on Certain 793D Off-Highway Trucks With Standard Wheel Arrangements is Available {1374, 1380, 5057}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.