745 and 740 GC & 740 EJECTOR Articulated Truck Systems Caterpillar


Pressure Switch - Oil Filter Bypass

Usage:

745 3F6


Illustration 1g06236027

Table 1
Item  Qty  Part  Specification Description 
Final installation torque for Steel is 30 ± 3 N·m (266 ± 27 lb in).
Final installation torque for Aluminum is 15 ± 3 N·m (133 ± 27 lb in)
Actuation pressure at temperature of −40° to 121°C (−72° to 218°F) is 137.9 ± 27.6 kPa (20.0 ± 4.0 psi).
Minimum de-actuation pressure at temperature of −40° to 121°C (−72° to 218°F) is 69 kPa (10 psi).
Contact position is normally closed below de-actuation pressure. 

Caterpillar Information System:

834K Wheel Dozer Systems and 836K Landfill Compactor Systems Pressure Switch - Differential
24 Motor Graders Refrigerant Compressor
SE50 VT Asphalt Screed Screed Plate
SE50 VT Asphalt Screed Screed Plate
MD6310 Rotary Drill Battery Disconnect Switch
Reuse and Salvage Guideline on 794 AC and 795F AC/XQ Retarder Group {1437, 1627, 3121, 425R} Reuse and Salvage Guideline on 794 AC and 795F AC/XQ Retarder Group {1437, 1627, 3121, 425R}
MD6200 Rotary Drill Operation
An Alternative Cab Mount Assembly is Now Available for Certain C-Series Articulated Trucks Equipped with 139-4593 Rollover Protective Structure (ROPS) Mounting Group {7266, 7301} An Alternative Cab Mount Assembly is Now Available for Certain C-Series Articulated Trucks Equipped with 139-4593 Rollover Protective Structure (ROPS) Mounting Group {7266, 7301}
Regulatory Compliance Information Radio Detection and Ranging (Radar) - C6 Radar - If Equipped
SE60 VT XW and SE60 V XW Asphalt Screed Machine Systems Screed Plate
SE50 VT Asphalt Screed Screed Plate
785G Off-Highway Truck Breather (DEF Tank) - Replace
SE50 VT Asphalt Screed Screed Frame
994K Wheel Loader Exhaust Outlet Nitrogen Oxide Sensor - Replace - Emission Related Component
994K Wheel Loader Exhaust Inlet Nitrogen Oxide Sensor - Replace - Emission Related Component
CW12 Pneumatic Compactor Machine Systems Water Spray Pump - Remove and Install
793F and 797F Off-Highway Trucks Chassis Electronic Control System Wiring Harness (Open Circuit) - Test
793F and 797F Off-Highway Trucks Chassis Electronic Control System Wiring Harness (Short Circuit) - Test
793F and 797F Off-Highway Trucks Chassis Electronic Control System General Information
793F and 797F Off-Highway Trucks Chassis Electronic Control System Service Tools
CW12 Pneumatic Compactor Machine Systems Hydraulic Oil Filter - Remove and Install
New Software Is Now Used on Certain 420F2 Backhoe Loaders {7620} New Software Is Now Used on Certain 420F2 Backhoe Loaders {7620}
Improved Front Standard Wheel Group Bearings for Certain 793 Off-Highway Trucks are Now Available {4006, 4205, 7551} Improved Front Standard Wheel Group Bearings for Certain 793 Off-Highway Trucks are Now Available {4006, 4205, 7551}
Procedure to Improve Routing of Brake Cooling Lines on Certain 793D Off-Highway Trucks With Standard Wheel Arrangements {1374, 1380, 5057} Procedure to Improve Routing of Brake Cooling Lines on Certain 793D Off-Highway Trucks With Standard Wheel Arrangements {1374, 1380, 5057}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.