An Improved Stabilizer Control Valve Group Is Now Used on Certain Backhoe Loaders {5051} Caterpillar


An Improved Stabilizer Control Valve Group Is Now Used on Certain Backhoe Loaders {5051}

Usage:

415F2 HWA
Backhoe Loader
415F2 (S/N: HWA1-466)
416F2 (S/N: LYA1-374; HWB1-1079; LBF1-2518)
420F2 (S/N: NMB1-90125; LBS1-488)
420F2 IT (S/N: LYC1-439; HWD1-1569)
420F2 ST (S/N: LYB1-545; HWC1-1964)
430F2 IT (S/N: LYE1-199; HWG1-451)
430F2 ST (S/N: LYD1-193; HWE1-569)

Description Of Change: An improved stabilizer control valve group is now used on the machines listed above. The new stabilizer valves have a threaded plug installed to capture any debris from the shuttle valve to keep it from going into the main spool bores, that will improve the service life of the component.

Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.

Table 1
Required Parts List 
Item  Qty  New Part Number  Part Name  Former Part Number (1) 
499-9321 (2)  Control Valve Gp  389-3142 
499-9322 (2)  Control Valve Gp  389-3144 
524-1838 (3)  Plug As 
(1) The former part number listed is for reference only and may differ.
(2) After failure only
(3) Before failure only


Illustration 1g06203942
Typical example
(1) 499-9321 Control Valve Gp
(2) 499-9322 Control Valve Gp
(3) 524-1838 Plug As

Caterpillar Information System:

427F2 Backhoe Loader Lubricant Viscosities - Fluids Recommendations
Service Replacements for the Water Separator Element in Certain Overhaul Kits Are Now Available on Certain 416D and 416E Backhoe Loaders {1000} Service Replacements for the Water Separator Element in Certain Overhaul Kits Are Now Available on Certain 416D and 416E Backhoe Loaders {1000}
Service Replacements for the Gasket Kit in Certain Overhaul Kits Are Now Available on Certain 416D Backhoe Loaders {1000} Service Replacements for the Gasket Kit in Certain Overhaul Kits Are Now Available on Certain 416D Backhoe Loaders {1000}
Instructions to Subscribe to Advanced Productivity From the Dealer Service Portal (DSP) After Upgrading to 2016A or Later Product Link Firmware {7606} Instructions to Subscribe to Advanced Productivity From the Dealer Service Portal (DSP) After Upgrading to 2016A or Later Product Link Firmware {7606}
Service Replacements for the Piston Kit and the Water Separator and Fuel Filter As in Certain Overhaul Kits Are Now Available on Certain 416E Backhoe Loaders {1213, 1214, 1215, 1218, 1219, 1225, 1239, 1258, 1260, 1261} Service Replacements for the Piston Kit and the Water Separator and Fuel Filter As in Certain Overhaul Kits Are Now Available on Certain 416E Backhoe Loaders {1213, 1214, 1215, 1218, 1219, 1225, 1239, 1258, 1260, 1261}
The Hydraulic Fluid Return Hose Material Has Been Improved on Certain F and F2 Series Backhoe Loaders. {5057} The Hydraulic Fluid Return Hose Material Has Been Improved on Certain F and F2 Series Backhoe Loaders. {5057}
14L Motor Grader Safety Messages
586C LRC Site Prep Tractor Operator Controls
785G Off-Highway Truck Systems Additional Electrical Components
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Transmission Planetary
Procedure to Install Improved Software to On-board Radio on CAT® Command for Underground Equipped Machines {733T} Procedure to Install Improved Software to On-board Radio on CAT® Command for Underground Equipped Machines {733T}
Installation Procedure of Cat Data Link (CDL) to J1939 Converter Kit on All Caterpillar Generator Sets with EMCP 4.2 Upgrade {0115} Installation Procedure of Cat Data Link (CDL) to J1939 Converter Kit on All Caterpillar Generator Sets with EMCP 4.2 Upgrade {0115}
24M Motor Grader Power Train Torque Converter Stall - Test
24M Motor Grader Power Train Torque Converter Stall - Test
986K Wheel Loader Fuel Tank Cap and Strainer - Clean
New Location for the Pilot Check Valve Group and the Union Is Now Used on Certain Knuckleboom Loaders {5057, 5067} New Location for the Pilot Check Valve Group and the Union Is Now Used on Certain Knuckleboom Loaders {5057, 5067}
An Improved Routing of the Auxiliary Drain Hose is Now Used on Certain 232D Skid Steer and 249D Compact Track Loaders {5057} An Improved Routing of the Auxiliary Drain Hose is Now Used on Certain 232D Skid Steer and 249D Compact Track Loaders {5057}
797F CMD Off-Highway Trucks Calibrations for Maintenance
New Muffler Group Is Now Used on Certain 24M Motor Graders {1062} New Muffler Group Is Now Used on Certain 24M Motor Graders {1062}
986K Wheel Loader Fuel System Secondary Filters - Replace
797F CMD Off-Highway Trucks Object Detection - Check/Adjust - Autonomy Perception
797F CMD Off-Highway Trucks Object Detection Sensor (Radar) - Check/Clean - Autonomy Perception
797F CMD Off-Highway Trucks Sensor (LIDAR) and Camera - Check/Clean
793F CMD Off-Highway Trucks Perception System - Calibrate
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.