Differential Pinion - Disassemble - Front and Rear
Show/hide table
Required Tools | |||
Tool | Part Number | Description | Qty |
A | 1P-0520 | Driver Group | 1 |
B | 5P-5197 | Retaining Ring Pliers | 1 |
C | 6V-4070 | Spanner Wrench | 1 |
D | 5F-7343 | Bearing Puller Gp | 1 |
Start By:
- Remove the Differential Pinion.
Note: The same disassembly procedure is used for the front differential pinion and for the rear differential pinion.
- Remove bolt (1) and yoke assembly (2).
Show/hide table
Illustration 2 g06126653 - Remove O-ring seal (3) inside the yoke assembly.
Show/hide table
Illustration 3 g06126655 - Remove bolts (5) and retainer (4).
Show/hide table
Illustration 4 g06126658 - Use Tooling (A) to remove seal (6). Remove seal (6).
Show/hide table
Illustration 5 g06126665 - Use Tooling (B) to remove retaining ring (7). Remove retaining ring (7) and locking washer (8).
Show/hide table
Illustration 6 g06126670 Show/hide tableIllustration 7 g06126676 - Use Tooling (C) to remove lock nut (9) from the pinion shaft.
- Remove lock nut (9) and notched washer (10).
Show/hide table
Illustration 8 g06126720 - Use suitable press to remove pinion shaft assembly (11) from pinion housing (12). Remove pinion shaft assembly (11).
Show/hide table
Illustration 9 g06126748 - Remove bearing cone (13).
Show/hide table
Illustration 10 g06126753 - Remove O-ring seal (14).
Show/hide table
Illustration 11 g06126775 Show/hide tableIllustration 12 g06126784 - Use suitable press to remove bearing cup (15) from the pinion housing. Remove bearing cup (15).
Show/hide table
Illustration 13 g06126789 - Use two suitable pry bars to remove bearing cup (16) from the pinion housing. Remove bearing cup (16).
Show/hide table
Illustration 14 g06126810 - Use a suitable press and Tooling (D) to remove bearing cone (17). Remove bearing cone (17) from the pinion shaft assembly.
- Remove bearing cone (17) from the pinion shaft assembly.
Show/hide table
Illustration 1 | g06126649 |
Caterpillar Information System:
A New Clean Fuel Module Pump is Available for Certain Large Off-Highway Trucks {1255, 1256} A New Clean Fuel Module Pump is Available for Certain Large Off-Highway Trucks {1255, 1256}
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Location of Components (Power Train System)
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems General Information (Power Train System)
2570D and 2670D Wheel Feller Buncher Engine Supplement Water Pump - Remove and Install
PM820, PM822, and PM825 Cold Planer Machine Systems Rotor Drive Clutch - Assemble
Procedure to Improve the Air Dryer System on Certain 785D Off-Highway Trucks {0679, 1451, 4285, 7050, 7051} Procedure to Improve the Air Dryer System on Certain 785D Off-Highway Trucks {0679, 1451, 4285, 7050, 7051}
PL61 Pipelayer Power Train Front Idler and Yoke - Install
PL61 Pipelayer Power Train Front Idler and Yoke - Remove
PM820, PM822, and PM825 Cold Planer Machine Systems Rotor Drive Clutch - Disassemble
PM820, PM822, and PM825 Cold Planer Machine Systems Wear Plate (Rotor Chamber) - Remove and Install
Service Maintenance Interval Reset Option Is Now Available on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {7000} Service Maintenance Interval Reset Option Is Now Available on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {7000}
994K Wheel Loader Machine Systems Brake Control Valve (Service) - Remove and Install
730C2 and 725C2 Articulated Truck Power Train Differential Pinion - Assemble - Front and Rear
AP300F Asphalt Paver Diesel Particulate Filter Regeneration
C7.1 Engines and Generator Sets ARD Fuel Pressure Is Low
2570D and 2670D Wheel Feller Buncher Engine Supplement Precleaner - Remove and Install
2570D and 2670D Wheel Feller Buncher Engine Supplement Air Cleaner - Remove and Install
A New Carrier Assembly With a Sleeve Bearing, Rotating Clutch Housing and Seals are Now Used in Certain 700 C-Series Articulated Trucks {3030, 3160} A New Carrier Assembly With a Sleeve Bearing, Rotating Clutch Housing and Seals are Now Used in Certain 700 C-Series Articulated Trucks {3030, 3160}
A Procedure to Repair the Corner of the Truck Body Canopy on Certain 770G and 772G Off-Highway Trucks is Now Available {0679, 7250, 7258} A Procedure to Repair the Corner of the Truck Body Canopy on Certain 770G and 772G Off-Highway Trucks is Now Available {0679, 7250, 7258}
C7.1 Engines and Generator Sets ARD Is Disabled
CP54B, CS54B and CS64B Soil Compactors Machine Systems Steering System Troubleshooting
Improved Packaging for the Transmission Gasket Is Now Used on Certain 730C Articulated Trucks {3160, 7555} Improved Packaging for the Transmission Gasket Is Now Used on Certain 730C Articulated Trucks {3160, 7555}
777E Off-Highway Truck TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} 777E Off-Highway Truck TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
784C and 785C Off-Highway Truck/Tractors Fuel System Primary Filter (Water Separator) - Drain - If Equipped