Flywheel
Show/hide table
| 图 1 | g01139170 |
注: 参阅系统运作/测试和调整以了解检查飞轮的正确方法。
(1) 螺栓
(2) 齿圈
(3) 弹簧销
安装齿圈中必须采用以下指南：
- 安装飞轮齿圈。 使齿圈 (2) 上的"零件编号"面向发动机缸体。 飞轮齿圈必须安装靠紧到台肩上。
- 在飞轮组装到曲轴前，将弹簧销 (3) 压入曲轴。 检查曲轴面到弹簧销 (3) 端部的距离。
距离 ... 11.0 ± 1.0 mm (0.43 ± 0.04 in)
- 上紧用来将飞轮固定到曲轴上的螺栓 (1) 。
上紧到以下扭矩。 ... 120 ± 20 N·m (90 ± 15 lb ft)
Caterpillar Information System:
G3612 and G3616 Engines Turbocharger - Inspect
3500B Engines for Caterpillar Built Power Modules Camshaft
G3612 and G3616 Engines Turbocharger - Clean - Cleaning with Dry Particles
3208 Marine Engine Magnetic Pickups - Clean/Inspect
3126B Engine for Caterpillar Built Machines Cylinder Block Cover Group
3126B Engine for Caterpillar Built Machines Front Housing and Covers
3126B Engine for Caterpillar Built Machines Piston Cooling Jet
G3606 and G3608 Engines Test Tools for the Electrical System
G3612 and G3616 Engines Engine Oil Level - Check
3126B Engine for Caterpillar Built Machines Piston and Rings
3406E Truck Engines Lubrication System
3126B Marine Engine Connecting Rod
3126B Engine for Caterpillar Built Machines Flywheel Housing
G3612 and G3616 Engines Air Inlet And Exhaust System
Installation Procedure For The Caterpillar Ignition System (CIS) On The G3608 Engine{1550} Installation Procedure For The Caterpillar Ignition System (CIS) On The G3608 Engine{1550}
Installation of the Caterpillar Ignition System (CIS) on G3606 and G3608 Engines{1550} Installation of the Caterpillar Ignition System (CIS) on G3606 and G3608 Engines{1550}
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Engine to Transmission Adapter
3126B Engine for Caterpillar Built Machines Gear Group (Front)
3500B Locomotive Engines Air Inlet and Exhaust Lines
G3612 and G3616 Engines Actuator Control Linkage - Replace
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Cold Start Strategy
322B Excavator Hydraulic System Visual Inspection
G3612 and G3616 Engines Actuator Control Linkage - Lubricate - If applicable
G3606 and G3608 Engines Cooling System Level Switch - Inspect