Actuator Control Linkage - Lubricate - If applicable
Show/hide table
 |
|
The linkage can move and form a pinch point which can cause personal injury. Keep hands away from the linkage. |
Before performing this procedure, ensure that the linkage is meant to be lubricated. If the linkage is meant to be lubricated, this article applies to the following: air choke actuator, fuel control actuator and exhaust bypass actuator.
Apply Dow Corning 41 Extreme High Temperature Bearing Grease to the rod ends (bearings) of the control linkage for the actuators. For more information on grease, see the Special Publication, SEBU6400, "Caterpillar Gas Engine Lubricant, Fuel, and Coolant Recommendations".
Show/hide table
| |
| Illustration 1 | g01120791 |
|
Typical locations of grease fittings | |
Show/hide table
| |
| Illustration 2 | g01120800 |
|
Typical locations of grease fittings | |
Caterpillar Information System:
322B Excavator Hydraulic System Visual Inspection
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Cold Start Strategy
G3612 and G3616 Engines Actuator Control Linkage - Replace
3500B Locomotive Engines Air Inlet and Exhaust Lines
3126B Engine for Caterpillar Built Machines Gear Group (Front)
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Engine to Transmission Adapter
Installation of the Caterpillar Ignition System (CIS) on G3606 and G3608 Engines{1550} Installation of the Caterpillar Ignition System (CIS) on G3606 and G3608 Engines{1550}
Installation Procedure For The Caterpillar Ignition System (CIS) On The G3608 Engine{1550} Installation Procedure For The Caterpillar Ignition System (CIS) On The G3608 Engine{1550}
G3612 and G3616 Engines Air Inlet And Exhaust System
3126B Engine for Caterpillar Built Machines Flywheel Housing
3126B Engine for Caterpillar Built Machines Flywheel
G3612 and G3616 Engines Turbocharger - Inspect
G3606 and G3608 Engines Cooling System Level Switch - Inspect
3054 Engine Water Temperature Regulator
3512 Industrial Engine Cooling System Coolant Analysis (Level II) - Obtain
3408E and 3412E Engines for Caterpillar Built Machines Coolant Temperature Sensor
3126B Engine for Caterpillar Built Machines Engine Oil Pressure Sensor - If Equipped
3126B and 3126E Truck Engines Boost Pressure Sensor
3126B Engine for Caterpillar Built Machines Atmospheric Pressure Sensor - If Equipped
3126B Engine for Caterpillar Built Machines Inlet Air Temperature Sensor
G3612 and G3616 Engines Engine Crankcase Breather - Clean
315B and 315B L Excavators and 315B L Forest Machine Machine System Specifications Track Carrier Roller
3126B and 3126E Truck Engines Belt Tensioner
3500 Generator Set Engines Cylinder Head