3408C, 3412, 3412C, and 3412D High Performance Marine Engines Caterpillar


Engine Speed Governing

Usage:

3412 3JK
发动机调速器监视以下项目:

  • 油门位置

  • 实际发动机转速

  • 燃油齿条的实际位置

电子调速器提供以下特性:

  • 发动机转速

  • 发动机响应

  • 扭矩输出

  • 烟雾限制

电子调速器还将任何调速器过调或欠调降至最低。 这将使发动机保持恒定的转速。

通过调节发动机输油控制发动机转速。 这使用燃油齿条的无刷力矩电机 (BTM)。 油门输入用于计算所需发动机转速。 此转速加到实际发动机转速上,以产生一个燃油齿条位置。

所需的最终燃油齿条位置取决于以下限值:

  • 扭矩

  • 烟雾

  • 冷模式燃油齿条位置

电子调速器( 8RG 和 3JK)

控制系统操作

在中速操作范围内,电子调速器的工作方式与机械调速器相同。 电子调速器没有转速降。 电子调速器有一个可编程的低怠速转速。 此低怠速转速介于 600 rpm 到 750 rpm 之间。 该范围不依赖于发动机的负载大小。 电子调速器消除可出现在机械调速器上的大部分高怠速过度运转。

Caterpillar Information System:

3126B Industrial Engine Engine Design
3126B Engine for Caterpillar Built Machines Water Temperature Regulator
PM3412C Power Modules Engine Description
G3612 and G3616 Engines Cold Weather Starting
3126B Engine for Caterpillar Built Machines Exhaust Manifold
3126B Truck Engine Turbocharger
3406E Truck Engines Air Inlet and Exhaust System
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Speed Sensing Loss Alarm
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Overspeed
G3612 and G3616 Engines Emergency Stopping
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package After Stopping Engine
3406E Truck Engines Cooling System
3126B Engine for Caterpillar Built Machines Camshaft
3126B and 3126E Truck Engines Water Temperature Regulator
3500 Petroleum Engines and Petroleum Generator Sets Product Description
Installation Of The 1W-1168 Front Housing Plate Assembly On The 0R-4351 Cylinder Block , The 0R-4352 Cylinder Block , The 0R-4353 Cylinder Block , And The 0R-4354 Cylinder Block {1163} Installation Of The 1W-1168 Front Housing Plate Assembly On The 0R-4351 Cylinder Block , The 0R-4352 Cylinder Block , The 0R-4353 Cylinder Block , And The 0R-4354 Cylinder Block {1163}
3406E Truck Engines Lubrication System
3126B Engine for Caterpillar Built Machines Engine Oil Filter Base
3126B Engine for Caterpillar Built Machines Crankshaft Seals
3126 Industrial Engine Electric Starting Motor
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Alternator Belt - Inspect/Adjust/Replace
G3612 and G3616 Engines Control Panel
3126B and 3126E Truck Engine General Information
3126E Truck Engines Glossary of Electronic Control Terms
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.