3126B Industrial Engine Caterpillar


Engine Design

Usage:

3126 6PZ



图 1g00290846

气缸和气门的位置

(A) 排气门

(B) 进气门

缸径 ... 110 mm (4.3 in)

冲程 ... 127 mm (5.0 in)

排量 ... 7.25 L (442 cu in)

缸号 ... 6

气缸布置 ... 直列式

每气缸气门数 ... 3

为检查发动机气门间隙的设定值,发动机必须是冷机且发动机必须停止。 发动机气门间隙设定值

进气 ... 0.38 ± 0.08 mm (0.015 ± 0.003 in)
排气 ... 0.64 ± 0.08 mm (0.025 ± 0.003 in)

燃烧类型 ... 直喷式

点火顺序 ... 1 - 5 - 3 - 6 - 2 - 4

曲轴旋转方向是通过从发动机飞轮端观察来确定的。 曲轴旋转 ... 逆时针

注: 发动机的前端是与发动机飞轮端相对的发动机的另一端。 发动机左右侧是通过从发动机飞轮端观察来确定的。 1 号缸是最前端的气缸。

Caterpillar Information System:

3126B Engine for Caterpillar Built Machines Water Temperature Regulator
PM3412C Power Modules Engine Description
G3612 and G3616 Engines Cold Weather Starting
3126B Engine for Caterpillar Built Machines Exhaust Manifold
3126B Truck Engine Turbocharger
3406E Truck Engines Air Inlet and Exhaust System
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Speed Sensing Loss Alarm
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Overspeed
G3612 and G3616 Engines Emergency Stopping
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package After Stopping Engine
3406E Truck Engines Cooling System
G3612 and G3616 Engines Reference Information
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Engine Speed Governing
3126B Engine for Caterpillar Built Machines Camshaft
3126B and 3126E Truck Engines Water Temperature Regulator
3500 Petroleum Engines and Petroleum Generator Sets Product Description
Installation Of The 1W-1168 Front Housing Plate Assembly On The 0R-4351 Cylinder Block , The 0R-4352 Cylinder Block , The 0R-4353 Cylinder Block , And The 0R-4354 Cylinder Block {1163} Installation Of The 1W-1168 Front Housing Plate Assembly On The 0R-4351 Cylinder Block , The 0R-4352 Cylinder Block , The 0R-4353 Cylinder Block , And The 0R-4354 Cylinder Block {1163}
3406E Truck Engines Lubrication System
3126B Engine for Caterpillar Built Machines Engine Oil Filter Base
3126B Engine for Caterpillar Built Machines Crankshaft Seals
3126 Industrial Engine Electric Starting Motor
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Alternator Belt - Inspect/Adjust/Replace
G3612 and G3616 Engines Control Panel
3126B and 3126E Truck Engine General Information
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.