 | |
| Illustration 1 | g00282688 |
Typical example | |
 | |
| Illustration 2 | g00489813 |
Typical solenoid connections | |
When the electric starting motor is viewed from the drive end, the motor rotates in the following direction. ... Clockwise
No load conditions at 25 °C (77 °F)
- Speed ... 7018 ± 1517 rpm
- Current ... 125.5 ± 27.5 amp
- Voltage ... 11 V
- Current ... 125.5 ± 27.5 amp
(1) Tighten the nut on the battery terminal to the following torque. ... 30.5 ± 3.5 N·m (22 ± 3 lb ft)
(2) Tighten the ground terminal to the following torque. ... 30.5 ± 3.5 N·m (22 ± 3 lb ft)
(3) Tighten the nut to the following torque. ... 2.25 ± 0.25 N·m (20 ± 2 lb in)
(4) Tighten the nut on the switch terminal to the following torque. ... 2.25 ± 0.25 N·m (20 ± 2 lb in)
(5) Tighten the nut on the motor terminal to the following torque. ... 8 ± 3 N·m (71 ± 27 lb in)
(6) Tighten the nut on the motor frame terminal to the following torque. ... 8 ± 3 N·m (71 ± 27 lb in)
Solenoid
Current draw at 12 V and 25 °C (77 °F)
- Pull-in windings ... 89 ± 5 amp
- Hold-in windings ... 23 ± 2 amp maximum