Autonomous Stop (A-Stop) System Caterpillar


A-Stop Transmitter Battery

Usage:

- CM4
The A-Stop transmitter is powered by a rechargeable, 1.2V (2300 mAh) NiMH battery which is charged using the port on the side of the transmitter. The transmitter charger ( 373-8621 Satellite Receiver Gp) will fully charge a fully depleted battery in approximately 2-4 hours. The charging will begin at a high rate charge followed by a top off charge. It is only recommended to charge the transmitter with the provided charger to avoid damage and/or reduced life of the battery or transmitter.

The transmitter sends signals at a 919 MHz fixed frequency to the A-Stop receivers within the transmitter operating range. Depending on conditions, the A-Stop transmitter has a range of approximately 180 m (590 ft) to 300 m (984 ft). The transmitter also has LED indicator lights for Stop, Clear, Test, Low Battery, Battery Charging, and Battery Fault functions. The transmitter will enter a power-saving sleep mode after 24 hours of inactivity or can be triggered manually.

Caterpillar Information System:

824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Joystick Control
Autonomous Stop (A-Stop) System Components
Autonomous Stop (A-Stop) General Information
Autonomous Stop (A-Stop) System A-Stop Transmitter
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Coupler Cylinder - Quick Coupler
814K Wheel Dozer Machine Systems Cylinder Mounting - Steering
988K XE Wheel Loader Systems Electronic Control Module
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Steering Control Valve
MH3037 Material Handler Camera
Front Strut Sealing System in Front Suspension Group May Fail on 795 AC, 797, 797B, 797F, and 797F XQ Off-Highway Trucks {0756, 7200, 7201} Front Strut Sealing System in Front Suspension Group May Fail on 795 AC, 797, 797B, 797F, and 797F XQ Off-Highway Trucks {0756, 7200, 7201}
AP500F Asphalt Paver Machine Systems Hydraulic Cylinder (Tow Point) - Remove and Install
AP500F Asphalt Paver Machine Systems Tow Arm - Remove and Install
Autonomous Stop (A-Stop) System Autonomous Stop Receivers
Autonomous Stop (A-Stop) System Antennas
Autonomous Stop (A-Stop) System General Information
Autonomous Stop (A-Stop) System Service Tools
Autonomous Stop (A-Stop) System Diagnostic Capabilities
Autonomous Stop (A-Stop) System A-Stop Fails to Clear
815K Soil Compactor and 816K Landfill Compactor Systems Push Arm - Left Hand
814K Wheel Dozer Machine Systems Cutting Edge
773G, 775G, and 777G Off-Highway Truck Automatic Lubrication System (Type B2) Control Module - Replace
Autonomous Stop (A-Stop) System A-Stop Fails to Register with the Test Station
Installation Guide for Product Link "Elite" Integration with Certain Cat® Hydraulic Mining Shovel with Board Control System (BCS) {7606, 7620} Installation Guide for Product Link "Elite" Integration with Certain Cat® Hydraulic Mining Shovel with Board Control System (BCS) {7606, 7620}
Update D10T2 and D11T Track-Type Tractors for Cat® Terrain v6 with Blade Control {7000} Update D10T2 and D11T Track-Type Tractors for Cat® Terrain v6 with Blade Control {7000}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.