AP355F Asphalt Paver Propel System Caterpillar


Bogie

Usage:

AP355F NED


Illustration 1g06055318

Table 1
Specification for 475-5190 Bogie Gp 
Item  Qty  Part  Specification Description 
8B-7614 Bearing Nut  Use the following procedure to tighten the bearing nut:

1. Tighten to 34 ± 7 N·m (301 ± 62 lb in).
2. Rotate or oscillate the hub to three revolutions.
3. Again, tighten to 34 ± 7 N·m (301 ± 62 lb in).
4. Repeat the above steps until there is no change in torque. 

Caterpillar Information System:

C13, C15, and C18 Tier 4 Final Engines Engine Oil Cooler - Base
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway Position Sensor - Proximity
C13, C15, and C18 Tier 4 Final Engines Flywheel Housing Cover
AP555F Asphalt Paver Machine Systems Suction Fan
AP555F Asphalt Paver Machine Systems Push Roller
AP355F Asphalt Paver Machine Systems Washdown Group
AP555F Asphalt Paver Machine Systems Counterbalance Valve (Hopper Hoist, Tow Point)
New VIMS 3G Software For Standalone VIMS Modules Is Now Available For Certain M Series Motor Graders {7601, 7610, 7620} New VIMS 3G Software For Standalone VIMS Modules Is Now Available For Certain M Series Motor Graders {7601, 7610, 7620}
C13, C15, and C18 Tier 4 Final Engines Fumes Disposal Group
AP355F Asphalt Paver Machine Systems Emulsion Tank
C13, C15, and C18 Tier 4 Final Engines Jacket Water Heater
AP555F Asphalt Paver Machine Systems Piston Pump (Auxiliary)
AP555F Asphalt Paver Machine Systems Track Tensioner - Remove and Install
14M3 Motor Grader Machine Systems Brake Accumulator - Remove and Install
C175 Tier 4 Final Engines for Off-Highway Trucks Coolant Temperature Control Module - Test
AP555F Asphalt Paver Machine Systems Bogie Wheel - Remove and Install
AP355F Asphalt Paver Machine Systems Operator Console
CS54B, CP54B and CS64B Vibratory Soil Compactors Machine Electronic Control System ECM Software - Install
An Improved Transmission Oil Level Gauge (Dipstick) is Now Used on Certain 424B Backhoe Loaders {3005, 3081} An Improved Transmission Oil Level Gauge (Dipstick) is Now Used on Certain 424B Backhoe Loaders {3005, 3081}
CS54B, CP54B and CS64B Vibratory Soil Compactors Machine Electronic Control System ECM - Configure
CS54B, CP54B and CS64B Vibratory Soil Compactors Machine Electronic Control System ECM - Replace
CS54B, CP54B and CS64B Vibratory Soil Compactors Machine Electronic Control System Connector Contact Description
MH3037 Material Handler Magnet Control - If Equipped
14M3 Motor Grader Machine Systems Control Valve (Brake) - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.