Blade Linkage - Remove and Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 189-0412 | Clevis | 2 |
B | 422-5475 | Lifting Eye Assembly | 2 |
- Disconnect grease hose assembly (1). Repeat for the opposite side.
Show/hide table
Illustration 2 g06009116 - Cut cable straps (2). Disconnect grease hose assemblies (3). Remove clamp (4). Reposition the hose assemblies out of the way. Repeat for the opposite side.
Show/hide table
Illustration 3 g06009124 - Remove bolts (5). Reposition lubrication distribution valve (6).
Show/hide table
Illustration 4 g06009131 - Remove bolts (7). Reposition bracket (8).
Show/hide table
Illustration 5 g06009157 - Attach a suitable lifting device to blade cylinder (11). The weight of blade cylinder (11) is approximately
55 kg (121 lb) . Remove bolt (9) and pin assembly (10). Lower blade cylinder (11). Repeat for the opposite side.Show/hide tableIllustration 6 g06009172 - Attach Tooling (A) , Tooling (B), and a suitable lifting device to blade linkage (12). The weight of blade linkage (12) is approximately
181 kg (400 lb) .Show/hide tableIllustration 7 g06009186 - Remove bolt (13) and pin assembly (14). Repeat for the opposite side.
Show/hide table
Illustration 8 g06009198 - Raise blade linkage (12) until blade linkage (12) is level.
Show/hide table
Illustration 9 g06009212 - Remove bolt (15) and pin assembly (16). Repeat for the opposite side.
- Remove blade linkage (12).
Show/hide table
Illustration 1 | g06009105 |
- Install blade linkage (12) in the reverse order of removal.
- Tighten bolt (15) to a torque of
325 ± 40 N·m (240 ± 30 lb ft) . - Tighten bolt (13) to a torque of
325 ± 40 N·m (240 ± 30 lb ft) . - Tighten bolt (9) to a torque of
325 ± 40 N·m (240 ± 30 lb ft) .
- Tighten bolt (15) to a torque of
Caterpillar Information System:
XQ570 Rental Generator Set Model View Illustrations
CW16 Pneumatic Compactor Belts - Inspect/Adjust/Replace
PM310, PM312 and PM313 Cold Planer Machine Systems Check Valve
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Fuel Tank - Remove and Install
Technical Analysis 1 (TA1) Visual Inspection for Wheel Loaders {0372, 1000, 7000, 753S, 7565} Technical Analysis 1 (TA1) Visual Inspection for Wheel Loaders {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Motor Grader {0372, 1000, 7000, 753T, 7565} Technical Analysis 1 (TA1) Visual Inspection for Motor Grader {0372, 1000, 7000, 753T, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565} Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Backhoe Loaders {0372, 1000, 7000, 753T, 7565} Technical Analysis 1 (TA1) Visual Inspection for Backhoe Loaders {0372, 1000, 7000, 753T, 7565}
415F2 Backhoe Loaders Hydraulic and Steering System Lines (Hydraulic)
New Software Installation Procedure For VIMS Module On Certain Motor Graders {7601, 7610, 7620} New Software Installation Procedure For VIMS Module On Certain Motor Graders {7601, 7610, 7620}
994K Large Wheel Loader Field Assembly Manual Cooling System Package Lines and Wiring - Connect
A New Recommendation For Cylinder Cut Out Testing Is Now Used on Certain 12K, 120K, 120K 2, 120K 2 OEM, 140K, 140K 2, and 160K Motor Grader Engines {7000} A New Recommendation For Cylinder Cut Out Testing Is Now Used on Certain 12K, 120K, 120K 2, 120K 2 OEM, 140K, 140K 2, and 160K Motor Grader Engines {7000}
CW16 Pneumatic Compactor Cooling System Coolant Sample (Level 1) - Obtain
415F2 Backhoe Loaders Hydraulic and Steering System Tilt Cylinder
CW16 Pneumatic Compactor Cooling System Water Temperature Regulator - Replace
CW16 Pneumatic Compactor Engine Oil Level - Check
CW16 Pneumatic Compactor Engine Oil Sample - Obtain
CW16 Pneumatic Compactor Engine Oil and Filter - Change
CW16 Pneumatic Compactor Cooling System Coolant Sample (Level 1) - Obtain
CW16 Pneumatic Compactor Engine Oil and Filter - Change
CW16 Pneumatic Compactor Engine Oil Level - Check
CW16 Pneumatic Compactor Engine Oil Sample - Obtain
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610} Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
LED Work Lights are Now Offered as Standard Equipment on Certain 797F Off-Highway Trucks {1429, 1434} LED Work Lights are Now Offered as Standard Equipment on Certain 797F Off-Highway Trucks {1429, 1434}