Parking Brake Manual Release
Show/hide table
 |
|
Personal injury or death can result from a brake malfunction. Do not operate the machine if the brake was applied due to a malfunction of the brake system. Correct any problem before attempting to operate the machine. |
There are four parking brakes on the machine
Show/hide table
| |
| Illustration 1 | g06008754 |
- Open the front engine access door on the operators platform.
- Turn locking ring (1) fully counterclockwise.
- Turn knob (2) fully clockwise.
- Turn the engine start switch on the dashboard to the I position to turn on the parking brake warning light.
- Operate the manual pump (3) until the parking brake warning light switches off.
- Proceed to tow the machine.
- Turn locking ring (2) fully counterclockwise and turn the knob (1) fully clockwise to restore the brake system.
- Close the front engine access door.
Caterpillar Information System:
PM-102 Cold Planer Towing the Machine
PM-102 Cold Planer Stopping the Engine if an Electrical Malfunction Occurs
PM-102 Cold Planer Stopping the Engine
994K Large Wheel Loader Field Assembly Manual Automatic Lubrication - Install
PM-102 Cold Planer Stopping the Machine
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Blade - Remove and Install
M314F, M316F, M318F, M320F, M322F, MH3022, MH3024 and MH3026 Wheeled Excavator Engine Supplement Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - Differential Pressure Sensor and Absolute Pressure Sensor
Procedure For Connecting To The Spare Fuses on F2 Series Backhoe Loaders {1417, 1422} Procedure For Connecting To The Spare Fuses on F2 Series Backhoe Loaders {1417, 1422}
New Mounting Plates for the ROPS Support Strut are Now Used on Certain B Series Compactors {7323} New Mounting Plates for the ROPS Support Strut are Now Used on Certain B Series Compactors {7323}
New Hose Assemblies and Clips are Now Used in the Fuel Lines on Certain 14M Motor Graders {1274} New Hose Assemblies and Clips are Now Used in the Fuel Lines on Certain 14M Motor Graders {1274}
AP500F, AP555F, AP600F, AP655F, AP655F L, AP1000F and AP1055F Asphalt Pavers and SE50 and SE60 Asphalt Screeds Operator Control Switch (Switch to Battery) - Test
AP600F Asphalt Paver Machine Systems Electrical System (Auxiliary Hydraulic)
PM-102 Cold Planer Machine Cleanup Procedure
Loader Arm Issues {6118, 6119} Loader Arm Issues {6118, 6119}
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Blade Cylinder - Remove and Install
A New Recommendation For Cylinder Cut Out Testing Is Now Used on Certain 12K, 120K, 120K 2, 120K 2 OEM, 140K, 140K 2, and 160K Motor Grader Engines {7000} A New Recommendation For Cylinder Cut Out Testing Is Now Used on Certain 12K, 120K, 120K 2, 120K 2 OEM, 140K, 140K 2, and 160K Motor Grader Engines {7000}
994K Large Wheel Loader Field Assembly Manual Cooling System Package Lines and Wiring - Connect
New Software Installation Procedure For VIMS Module On Certain Motor Graders {7601, 7610, 7620} New Software Installation Procedure For VIMS Module On Certain Motor Graders {7601, 7610, 7620}
415F2 Backhoe Loaders Hydraulic and Steering System Lines (Hydraulic)
Technical Analysis 1 (TA1) Visual Inspection for Backhoe Loaders {0372, 1000, 7000, 753T, 7565} Technical Analysis 1 (TA1) Visual Inspection for Backhoe Loaders {0372, 1000, 7000, 753T, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565} Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Motor Grader {0372, 1000, 7000, 753T, 7565} Technical Analysis 1 (TA1) Visual Inspection for Motor Grader {0372, 1000, 7000, 753T, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Wheel Loaders {0372, 1000, 7000, 753S, 7565} Technical Analysis 1 (TA1) Visual Inspection for Wheel Loaders {0372, 1000, 7000, 753S, 7565}
M314F, M316F, M318F, M320F and M322F Wheeled Excavator and Material Handler Machine Systems Fuel Tank - Remove and Install