Steering Cylinder (Front) - Remove and Install
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 1P-2320 | Combination Puller | 1 |
| B | - | Loctite 271 | - |
Start By:
- Remove the front axle.
- Place front axle assembly (2) onto suitable cribbing. Loosen nut (1) from each side.
- Use Tooling (A) in order to disconnect tie rod (3). Remove nut (1) and remove tie rod (3). Repeat for the other side.
Show/hide table
Illustration 3 g01117236 - Remove bolts (4) and remove steering cylinder (5).
Show/hide table
| |
| Illustration 1 | g01117223 |
Show/hide table
| |
| Illustration 2 | g01117229 |
- Install steering cylinder (5) in the reverse order of removal.
- Apply Tooling (B) to threads on bolts (4).
- Tighten bolts (4) to a torque of
460 N·m (340 lb ft) . - Tighten nut (1) to a torque of
220 N·m (162 lb ft) .
Caterpillar Information System:
AP255E Asphalt Paver Engine Supplement Gear Pump (Fan Drive) - Remove
AP300F Asphalt Paver Engine Starting
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Tie Rod (Steering)(Front) - Remove and Install
AP300F Asphalt Paver Hopper Travel Lock
M314F, M316F, M318F, M320F, M322F, MH3022, MH3024 and MH3026 Wheeled Excavator Engine Supplement Refrigerant Compressor - Remove and Install
SE34 V and SE34 VT Asphalt Screeds Screed Service Locks
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Check Valve
AP355F Asphalt Paver Decelerator Control
M314F, M316F, M318F, M320F, M322F, MH3022, MH3024 and MH3026 Wheeled Excavator Engine Supplement Alternator - Remove and Install
Reuse & Salvage Procedure for Off-Highway Truck Accumulators {0374, 0599, 0679, 0738, 4269, 4331, 5077} Reuse & Salvage Procedure for Off-Highway Truck Accumulators {0374, 0599, 0679, 0738, 4269, 4331, 5077}
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Tire and Rim (Front) - Remove and Install
816K Landfill Compactor and 815K Soil Compactor Systems Sensor Supply - Test
AP255E Asphalt Paver Engine Supplement Exhaust (Muffler) - Remove and Install
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Final Drive Planetary - Remove and Install - Front
740 GC, 740 Ejector, 745 Articulated Truck Power Train Output Transfer Gears - Remove and Install
3412E Engine for 773E Off-Highway Trucks Sensor Signal (Analog, Active) - Test
2015/06/02 Expansion Of Reman Hydraulic Pumps {5070, 7754}
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Final Drive Planetary - Remove and Install - Rear
AP355F Asphalt Paver Push Roller
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Electrical Power Supply - Test
PL83 and PL87 Pipelayers Engine Supplement Catalyst (SCR) - Remove and Install
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train Electronic Control System MID 027 - CID 1893 - FMI 12
AP355F Asphalt Paver Machine Cleanup Procedure
Bolt Inspection on 450F Backhoe Loader For Leaking Seal Kit On Hydraulic Gear Pump{5073} Bolt Inspection on 450F Backhoe Loader For Leaking Seal Kit On Hydraulic Gear Pump{5073}