TURBOCHARGER FAILURES ON TRUCKS EQUIPPED WITH CATALYTIC CONVERTER MUFFLERS Caterpillar


TURBOCHARGER FAILURES ON TRUCKS EQUIPPED WITH CATALYTIC CONVERTER MUFFLERS

Usage:

TURBOCHARGER FAILURES ON TRUCKS EQUIPPED WITH CATALYTIC CONVERTER MUFFLERS

CONFIDENTIAL TIBU4333-00

TECHNICAL INFORMATION BULLETIN

AUGUST 18, 2004

TRUCK ENGINES

C11 (KCA1-Up)

C13 (KCB1-Up)

C15 (BXS1-Up)

C-10 (MBJ1-Up)

C-12 (MBL1-Up)

C-15 (MBN1-Up)

 

Component Code 1091

SUBJECT: TURBOCHARGER FAILURES ON TRUCKS EQUIPPED WITH CATALYTIC CONVERTER MUFFLERS

PROBLEM:

If a turbocharger failure occurs on the above listed trucks, this failure may cause engine oil to be deposited into the exhaust system. For trucks with catalytic converter mufflers, the exhaust system will need to be cleaned if an excessive amount of oil is present.

An excessive amount of engine oil is defined as oil dripping from the exhaust piping when the turbocharger is removed.

SOLUTION:

If an excessive amount of oil is present, the exhaust piping must be cleaned and the catalytic converter muffler(s) must be replaced. Failure to clean the exhaust system and replace the catalytic converter muffler(s) may cause additional engine or chassis damage. Claim the turbocharger and any other Caterpillar components through the Caterpillar claims system. Claim the catalytic converter muffler(s) and any other OEM parts through the OEM claims service.

This TIB should be shared with all TEPS dealers.

 

COPYRIGHT 2004 CATERPILLAR
ALL RIGHTS RESERVED

Caterpillar Information System:

Turbocharger Blade Failures on the C13 On-Highway Engines Turbocharger Blade Failures on the C13 On-Highway Engines
RADIATOR EXPANSION TANK OVERFLOWS RADIATOR EXPANSION TANK OVERFLOWS
Correct bolt torque when securing the generator flex plate coupling Correct bolt torque when securing the generator flex plate coupling
Online Passwords are Now Available Online Passwords are Now Available
Engine Control System and Charging System Failures Engine Control System and Charging System Failures
Injector Misfire Due to Low/No Fuel Condition Injector Misfire Due to Low/No Fuel Condition
UPS system-generated error messages regarding, �Static Switch Thyristor Open� and �Static Switch Timeout A+B-� UPS system-generated error messages regarding, �Static Switch Thyristor Open� and �Static Switch Timeout A+B-�
232-9737 Software Issues with MSS Standalone Time/Date Functions 232-9737 Software Issues with MSS Standalone Time/Date Functions
Certain Keel Cooled C18 Marine Engines May Leak Coolant Certain Keel Cooled C18 Marine Engines May Leak Coolant
C11/C13 Air Compressor Piston Seizure C11/C13 Air Compressor Piston Seizure
3406E Marine Software 3406E Marine Software
Valve Bonnets with Insufficient Hardness Valve Bonnets with Insufficient Hardness
INCORRECT SPECIAL INSTRUCTION MAY BE PACKAGED INCORRECT SPECIAL INSTRUCTION MAY BE PACKAGED
OIL IN COOLANT DIAGNOSTIC FOR 3126B, 3126E, AND C7 ENGINES OIL IN COOLANT DIAGNOSTIC FOR 3126B, 3126E, AND C7 ENGINES
Single Side Band (SSB) Radio Interference with the Caterpillar Multi-Station Control System on Marine Engines Single Side Band (SSB) Radio Interference with the Caterpillar Multi-Station Control System on Marine Engines
Eaton Top 2 Transmission shifting problem with C11, C13, and C15 Truck Engines Eaton Top 2 Transmission shifting problem with C11, C13, and C15 Truck Engines
CLAAS C-10 AND C-12 ENGINE ALTERNATOR MOUNTING SUPPORT ASSEMBLY CLAAS C-10 AND C-12 ENGINE ALTERNATOR MOUNTING SUPPORT ASSEMBLY
Troubleshooting 24VDC Power Supplies used in Caterpillar UPS product Troubleshooting 24VDC Power Supplies used in Caterpillar UPS product
New Flash Files For C15 Engines New Flash Files For C15 Engines
3500 A3 (Series 2) Marine Propulsion Software Does Not Perform The Injector Solenoid Test Properly 3500 A3 (Series 2) Marine Propulsion Software Does Not Perform The Injector Solenoid Test Properly
The �Droop (%)� parameter cannot be set using the ET Service Tool as stated in the 3500B Series II Marine Gen Set Engines Troubleshooting Guide (RENR5004). The �Droop (%)� parameter cannot be set using the ET Service Tool as stated in the 3500B Series II Marine Gen Set Engines Troubleshooting Guide (RENR5004).
221-1018 Engine ECM Problems 221-1018 Engine ECM Problems
Fault Code 94-03 Fuel Pressure Voltage High Present After Updating the C7 Engine Control Module and the C9 Engine Control Module (ECM) with October or Later Flash Files Fault Code 94-03 Fuel Pressure Voltage High Present After Updating the C7 Engine Control Module and the C9 Engine Control Module (ECM) with October or Later Flash Files
New PC Service Tool Software Released for Cellular Based Product Link (PL102C) New PC Service Tool Software Released for Cellular Based Product Link (PL102C)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.