Auger Conveyor - Mounting
Show/hide table
 | |
| Illustration 1 | g03692650 |
Show/hide table
| Specification for 393-2760 Auger Conveyor and Mounting Gp and 446-1209 Auger Conveyor and Mounting Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 8 | 8T-4193 Bolt | Tighten the bolts enough so that free play has been removed in the auger frame and secure with jam nuts. |
| 2 | - | - | Apply Loctite C5A Copper Anti-Seize to all contact surfaces on tensioner plates, auger frame plate slots, washer contact areas, and tractor main frame slots. |
| 3 | 1 | 421-3386 Plate As | Before assembly, apply Loctite C5A Copper Anti-Seize to the contact surfaces. |
| 4 | 1 | 393-2293 Cover | Before assembly, apply Permetex Form-A-Gasket number 2, to seal cover to auger support. |
Show/hide table
 | |
| Illustration 2 | g03692651 |
Show/hide table
| Item | Qty | Part | Specification Description |
| 5 | 1 | 430-5201 Plate | Before assembly, apply Loctite C5A Copper Anti-Seize to the contact surfaces. |
| 6 | 1 | 393-2754 Plate As | Before assembly, apply Loctite C5A Copper Anti-Seize to the contact surfaces. |
| 7 | 2 | 442-7825 Plate | Before assembly, apply Loctite C5A Copper Anti-Seize to the contact surfaces. |
| 8 | 12 | 7X-2475 Bolt | Torque to 200 ± 10 N·m (148 ± 7 lb ft). |
Show/hide table
 | |
| Illustration 3 | g03692652 |
Right side view | |
Show/hide table
| Item | Qty | Part | Specification Description |
| B | - | - | Sprockets to be aligned within 60 ± 2 mm (2.4 ± 0.1 inch) on both sides to the plates. |
| 9 | 4 | 4B-1771 Setscrew | Before assembly, apply blue Loctite 242 to the threads. |
| 10 | 4 | 2H-3906 Socket Setscrew | Before assembly, apply blue Loctite 242 to the threads. |
| 11 | 2 | 382-5519 Auger Bearing | Use the following procedure to assemble the auger bearings: 1. Tighten the split cap close to the shaft. 2. Fully push the split cap on the housing of the auger bearing. 3. Tighten the bolts of the split cap. |
Caterpillar Information System:
MH3022, MH3024 and MH3026 Material Handlers Hydraulic System Case Drain (Main Pump) - Test
AP1000F Asphalt Paver Machine Systems Communication Electronic Control Module (Product Link)
M314F, M316F, M318F, M320F and M322F Wheeled Excavators Machine Only Operates in Travel Mode
M314F, M316F, M318F, M320F and M322F Wheeled Excavators Machine Only Operates in Power Mode
730C and 730C EJECTOR Articulated Trucks Pressure Sensor (NRS Differential) - Remove and Install
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Power Train Final Drive Spindle and Service Brake - Disassemble
AP1055F Asphalt Paver Machine Systems Fuel Lines
730C and 730C EJECTOR Articulated Trucks Pressure Sensor (NRS Absolute) - Remove and Install
M314F, M316F, M318F, M320F and M322F Wheeled Excavators Machine Only Operates in Economy Mode
C3.4B Industrial Engine Reference Information
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Piston Pump (Implement) - Test and Adjust
C3.4B Industrial Engine Plate Locations and Film Locations
MH3022, MH3024 and MH3026 Material Handlers Hydraulic System Main Pump - Test - Test without Flow Meter
MH3022, MH3024 and MH3026 Material Handlers Hydraulic System Main Pump (Destroke Pressure) - Test and Adjust
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Piston Pump Cutoff Pressure (Hydraulic Fan) - Test and Adjust
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Piston Pump Margin Pressure (Hydraulic Fan) - Test and Adjust
The Third Clutch Friction Disc May Fail on Certain 777 Off-Highway Trucks{3054, 3155, 3160} The Third Clutch Friction Disc May Fail on Certain 777 Off-Highway Trucks{3054, 3155, 3160}
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Hydraulic Fan Speed - Test and Adjust
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Pressure Tap Locations
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Power Train Final Drive Spindle and Service Brake - Disassemble
MH3022, MH3024 and MH3026 Material Handlers Hydraulic System Main Pump (Maximum Displacement) - Test and Adjust - Test without Flow Meter
PM-200 Cold Planer Maintenance Interval Schedule
2014/08/01 New VIMSTM Software is Now Available On Certain Off-Highway Truck/Tractors {7601, 7620}
MH3022, MH3024 and MH3026 Material Handlers Hydraulic System Relief Valve (Signal Limiter) - Test and Adjust