730C and 730C EJECTOR Articulated Trucks Caterpillar


Pressure Sensor (NRS Differential) - Remove and Install

Usage:

730C TFF

Removal Procedure



    Illustration 1g03694149

  1. Remove cable straps (2). Disconnect harness assembly (3). Remove bolts (1) and pressure sensor (NRS differential) (4).

Installation Procedure

  1. Install pressure sensor (NRS differential) (3) in the reverse order of removal.

    1. Tighten bolts (1) to a torque of 20 ± 2 N·m (177 ± 18 lb in).

Caterpillar Information System:

826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Power Train Final Drive Spindle and Service Brake - Disassemble
AP1055F Asphalt Paver Machine Systems Fuel Lines
730C and 730C EJECTOR Articulated Trucks Pressure Sensor (NRS Absolute) - Remove and Install
M314F, M316F, M318F, M320F and M322F Wheeled Excavators Machine Only Operates in Economy Mode
C3.4B Industrial Engine Reference Information
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Piston Pump (Implement) - Test and Adjust
C3.4B Industrial Engine Plate Locations and Film Locations
AP1000F Asphalt Paver Machine Systems Communication Electronic Control Module (Product Link)
M314F, M316F, M318F, M320F and M322F Wheeled Excavators Hydraulic Response Is Poor
C3.4B Industrial Engine Model View Illustrations
730C and 730C EJECTOR Articulated Trucks Venturi Tube - Remove and Install
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Pump Control Valve (Implement)
M314F, M316F, M318F, M320F and M322F Wheeled Excavators Machine Only Operates in Power Mode
M314F, M316F, M318F, M320F and M322F Wheeled Excavators Machine Only Operates in Travel Mode
AP1000F Asphalt Paver Machine Systems Communication Electronic Control Module (Product Link)
MH3022, MH3024 and MH3026 Material Handlers Hydraulic System Case Drain (Main Pump) - Test
AP1000F Asphalt Paver Machine Systems Auger Conveyor - Mounting
MH3022, MH3024 and MH3026 Material Handlers Hydraulic System Main Pump - Test - Test without Flow Meter
MH3022, MH3024 and MH3026 Material Handlers Hydraulic System Main Pump (Destroke Pressure) - Test and Adjust
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Piston Pump Cutoff Pressure (Hydraulic Fan) - Test and Adjust
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Piston Pump Margin Pressure (Hydraulic Fan) - Test and Adjust
The Third Clutch Friction Disc May Fail on Certain 777 Off-Highway Trucks{3054, 3155, 3160} The Third Clutch Friction Disc May Fail on Certain 777 Off-Highway Trucks{3054, 3155, 3160}
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Hydraulic Fan Speed - Test and Adjust
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Pressure Tap Locations
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.