Bank Valve (Loader) - Install
Installation Procedure
- Attach suitable lifting device to loader bank valve (17). The weight of bank valve (17) is approximately 20 kg (44 lb).
Show/hide table
 | |
| Illustration 1 | g03686429 |
- Install loader bank valve (17) for the loader through the bottom of the machine. Install bolts (16) .
- Connect seven hose assemblies (15) .
Show/hide table
 | |
| Illustration 2 | g03686428 |
View from the front of the bank valve | |
- Connect six tube assemblies (14) .
Show/hide table
 | |
| Illustration 3 | g03686427 |
View from the front of the bank valve | |
- Install loader lift and tilt linkage (13). Install pins (11) and lockpins (12) .
Show/hide table
 | |
| Illustration 4 | g03686431 |
- Install bracket (8) for the parking brake. Install bolts (10) .
Show/hide table
 | |
| Illustration 5 | g03686425 |
- Connect harness assembly (9) .
- Install cover (7) and screws (6) .
Show/hide table
 | |
| Illustration 6 | g03686424 |
- Install plate (5) and screws (4) .
Show/hide table
 | |
| Illustration 7 | g03686423 |
- Install floor mat (1), Plate (3), and screws (2). Repeat for the other side.
Show/hide table
 | |
| Illustration 8 | g03686020 |
Caterpillar Information System:
AP655F and AP655F L Asphalt Paver Machine Systems Hydraulic Tank
AP555F Asphalt Paver Machine Systems Hydraulic Cylinder (Tow Point)
AP555F Asphalt Paver Machine Systems Hydraulic Cylinder (Screed Hoist)
R1700G Load Haul Dump Secondary Steering - If Equipped
R1700G Load Haul Dump Parking Brake
R1700G Load Haul Dump Engine and Machine Warm-Up
R1700G Load Haul Dump Joystick Control
R1700G Load Haul Dump Autoshift Control (STIC Steering)
2014/07/03 The Brake Oil Cooler Lines Group has been Improved on the 795F AC Off-Highway Truck {4257, 5057}
2014/06/10 Improvements to the Field Assembly Kit Boxing Arrangements Have Been Implemented on all 777G Off-Highway Trucks {7000, 7000, 7960}
R1700G Load Haul Dump Transmission Neutralizer Override Control
2014/09/12 New Center Tube Step Assembly Is Now Used on Certain 793F Off-Highway Trucks {7254}
AP1000F Asphalt Paver Propel System Hydraulic Tank and Mounting
424B HD Backhoe Loader Machine Systems Bank Valve (Loader) - Disassemble
C3.4B Engines for Caterpillar Built Machines Fuel Priming Pump - Remove and Install
C3.4B Engines for Caterpillar Built Machines Flow Control Valve - Remove and Install
C3.4B Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install
C3.4B Engines for Caterpillar Built Machines Water Separator and Fuel Filter (Primary) - Remove and Install
C3.4B Engines for Caterpillar Built Machines Fuel Manifold (Rail) - Remove and Install
C3.4B Engines for Caterpillar Built Machines Fuel Injection Lines - Remove
C3.4B Engines for Caterpillar Built Machines Fuel Injection Lines - Install
C3.4B Engines for Caterpillar Built Machines Exhaust Cooler (NRS) - Remove and Install
C3.4B Engines for Caterpillar Built Machines Throttle Valve (Intake Air) - Remove and Install - Rear Facing Inlet Elbow
C3.4B Engines for Caterpillar Built Machines Throttle Valve (Intake Air) - Remove and Install - Side Facing Inlet Elbow