AP555F Asphalt Paver Machine Systems Caterpillar


Hydraulic Cylinder (Screed Hoist)

Usage:

AP500F 449


Illustration 1g03687697

Table 1
Specification for 396-7145 Hydraulic Cylinder Gp 
Item  Qty  Part  Specification Description 
Cylinder bore is 88.9 mm (3.50 inch)
Rod diameter is 38.1 mm (1.50 inch)
Retracted length is 717.6 ± 2.3 mm (28.25 ± 0.09 inch).
Extended length is 1085.9 mm (42.75 inch).
Stroke length is 368.30 ± 2.30 mm (14.500 ± 0.090 inch)

Caterpillar Information System:

R1700G Load Haul Dump Secondary Steering - If Equipped
R1700G Load Haul Dump Parking Brake
R1700G Load Haul Dump Engine and Machine Warm-Up
R1700G Load Haul Dump Joystick Control
R1700G Load Haul Dump Autoshift Control (STIC Steering)
2014/07/03 The Brake Oil Cooler Lines Group has been Improved on the 795F AC Off-Highway Truck {4257, 5057}
2014/06/10 Improvements to the Field Assembly Kit Boxing Arrangements Have Been Implemented on all 777G Off-Highway Trucks {7000, 7000, 7960}
R1700G Load Haul Dump Transmission Neutralizer Override Control
2014/09/12 New Center Tube Step Assembly Is Now Used on Certain 793F Off-Highway Trucks {7254}
R1700G Load Haul Dump Steering and Transmission Lock Control (STIC Steering)
730C and 730C EJECTOR Articulated Trucks Nozzle Heater Harness - Remove and Install
Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490} Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
AP555F Asphalt Paver Machine Systems Hydraulic Cylinder (Tow Point)
AP655F and AP655F L Asphalt Paver Machine Systems Hydraulic Tank
424B HD Backhoe Loader Machine Systems Bank Valve (Loader) - Install
AP1000F Asphalt Paver Propel System Hydraulic Tank and Mounting
424B HD Backhoe Loader Machine Systems Bank Valve (Loader) - Disassemble
C3.4B Engines for Caterpillar Built Machines Fuel Priming Pump - Remove and Install
C3.4B Engines for Caterpillar Built Machines Flow Control Valve - Remove and Install
C3.4B Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install
C3.4B Engines for Caterpillar Built Machines Water Separator and Fuel Filter (Primary) - Remove and Install
C3.4B Engines for Caterpillar Built Machines Fuel Manifold (Rail) - Remove and Install
C3.4B Engines for Caterpillar Built Machines Fuel Injection Lines - Remove
C3.4B Engines for Caterpillar Built Machines Fuel Injection Lines - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.