C7 Engine for Caterpillar Built Machine Caterpillar


Engine Oil Cooler - Remove and Install

Usage:

MH3037 KPM

拆卸步骤

开始:

  1. 拆下发动机机油滤清器底座。

------ WARNING! ------

热的冷却液、蒸汽和碱会造成人身伤害。

在工作温度下,发动机冷却液是热的而且处在压力下。 散热器和所有到加热器的管路或发动机中都有热的冷却液或蒸汽。 与它们的任何接触都会造成严重烫伤。

只有当发动机停机且冷却系统压力盖已经冷却到可以徒手触摸时,再慢慢拆下冷却系统压力盖以释放压力。

不要试图在冷却液还热的时候去拧紧软管接头,软管会脱落而造成灼伤。

警告:冷却系统的冷却液添加剂含碱。 应避免它与皮肤和眼睛接触。



注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。



注意

在进行检验、保养、测试、调整及维修产品期间,必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。

有关收集和盛接 Cat 产品上油液的适用工具和用品,请参阅专门出版物, NENG2500, "代理商维修工具目录"。

按照当地法规和要求处置所有液体。





    图 1g01026362

  1. 将机油冷却器 (1) 和垫片从缸体上拆下。

  1. 将 O 形密封圈 (2) 从缸体上拆下。

安装步骤

  1. 按与拆卸相反的顺序安装机油冷却器 (1) 。

Caterpillar Information System:

586C LRC Site Prep Tractor Cooling System Water Temperature Regulator - Replace
C7 Engine for Caterpillar Built Machine Engine Oil Filter Base - Remove and Install
C7 Engine for Caterpillar Built Machine Exhaust Manifold - Remove and Install
C7 Engine for Caterpillar Built Machine Turbocharger - Remove and Install
C7 Engine for Caterpillar Built Machine Unit Injector Hydraulic Pump - Remove and Install
2014/05/30 The Handrail Group has been Improved on the 793F Off-Highway Truck {7256}
735C, 740C EJECTOR and 745C Articulated Trucks Backup Alarm Always On
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Service Brakes
735C, 740C EJECTOR and 745C Articulated Trucks Backup Alarm Always Off
2014/06/23 New Spacers for Transmission Shafts Two and Three are Now Available for Certain Motor Graders {3063, 3155, 3170}
C7 Engine for Caterpillar Built Machine Electronic Unit Injector Sleeve - Remove and Install
735C, 740C EJECTOR and 745C Articulated Trucks Symptom Troubleshooting
C7 Engine for Caterpillar Built Machine Water Pump - Remove and Install
C7 Engine for Caterpillar Built Machine Crankshaft Rear Seal - Remove and Install
586C LRC Site Prep Tractor Braking System - Test
C7 Engine for Caterpillar Built Machine Gear Group (Front) - Remove and Install
C7 Engine for Caterpillar Built Machine Housing (Front) - Remove and Install
C7 Engine for Caterpillar Built Machine Rocker Arm and Shaft - Remove and Install
C7 Engine for Caterpillar Built Machine Camshaft - Remove and Install
Procedure for Installing Improved GPS Antenna Mast Back Support and Clamps on Certain Off-Highway Trucks{733B} Procedure for Installing Improved GPS Antenna Mast Back Support and Clamps on Certain Off-Highway Trucks{733B}
C7 Engine for Caterpillar Built Machine Camshaft Bearings - Remove and Install
C7 Engine for Caterpillar Built Machine Engine Oil Pan - Remove and Install
C7 Engine for Caterpillar Built Machine Crankshaft - Remove and Install
2014/04/11 An Improved Rear Service Brake Lines Group Is Now Used on Certain 789D Off-Highway Trucks {4257}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.