PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 116-7153, 190-6126, AND 228-5112 PRELUBE MOTORS/PUMPS IN DEALER PARTS STOCK
Usage:
TEBE3211-00
Show/hide table
| 08Jun2015 |
U-290
A-199
D-235
O-240
Show/hide table
| Parts stock action only | PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 116-7153, 190-6126, AND 228-5112 PRELUBE MOTORS/PUMPS IN DEALER PARTS STOCK |
|
| 7750 | PI70566 |
|
Show/hide table
| NOTE: | Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar. |
| NOTE: | When submitting claim for Parts Stock Action, Use the appropriate 99Z as the s/n, the appropriate Service Letter Program Number as the Part number in the Part Causing Failure field, "7751" as the Group Number, "56" as the Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 30Sep2015 |
PROBLEM
Show/hide table
| Some of the existing 116-7153, 190-6126, and 228-5112 Prelube Motors/Pumps in dealer parts stock can fail if placed into service. If the existing prelube motors fail it could result in alarms and warnings as well as downtime for repair. |
ACTION REQUIRED
Show/hide table
| Inspect the following prelube motors/pumps in dealer parts stock: 116-7153 Motor Group 190-6126 Motor Group 228-5112 Pump Group Check the serial number on the prelube motor, the serial number is engraved on the pump side of the assembly. If the serial number is above 51070 mark the package to indicate it has been inspected according to this program. Return the part to dealer parts stock. If a prelube motor has the serial number 51070 or below, then remove the motor from dealer parts stock. Image1, example of typical serial number location. |
Show/hide table
 |
| Image1 |
SERVICE CLAIM ALLOWANCES
Show/hide table
| Submit one claim for all parts removed from dealer parts stock. |
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 447-6264 TOOL ASSEMBLIES (CRANKSHAFT SEAL INSTALLERS) FROM DEALER INVENTORY PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 447-6264 TOOL ASSEMBLIES (CRANKSHAFT SEAL INSTALLERS) FROM DEALER INVENTORY
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL LINES ON CERTAIN 3516B LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL LINES ON CERTAIN 3516B LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE COMMUNICATION NETWORK ON CERTAIN PMG3516C (XQ1475G) POWER MODULES PRODUCT SUPPORT PROGRAM FOR REWORKING THE COMMUNICATION NETWORK ON CERTAIN PMG3516C (XQ1475G) POWER MODULES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE GENERATOR ON CERTAIN C2.2 (XQ20) GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE GENERATOR ON CERTAIN C2.2 (XQ20) GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE AIR CLEANER CASE ASSEMBLY ON CERTAIN C32 MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE AIR CLEANER CASE ASSEMBLY ON CERTAIN C32 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PISTONS AND LINERS ON CERTAIN PM3516 POWER MODULES PRODUCT SUPPORT PROGRAM FOR REPLACING THE PISTONS AND LINERS ON CERTAIN PM3516 POWER MODULES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CYLINDER LINERS ON CERTAIN 3512B GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE CYLINDER LINERS ON CERTAIN 3512B GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 8N-9706 TUBES FOR THE EXPANSION TANK ON CERTAIN 3512C HD, AND 3516C HD MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE 8N-9706 TUBES FOR THE EXPANSION TANK ON CERTAIN 3512C HD, AND 3516C HD MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL PAN GP FITTINGS (QUICK DISCONNECTS) ON CERTAIN C8.7 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL PAN GP FITTINGS (QUICK DISCONNECTS) ON CERTAIN C8.7 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CAN CONNECTOR ON CERTAIN 3512B GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE CAN CONNECTOR ON CERTAIN 3512B GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE COOLANT ON CERTAIN C15 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE COOLANT ON CERTAIN C15 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LOW PRESSURE FUEL HOSE TO SECONDARY FUEL FILTER ON CERTAIN C7.1 GENERATOR SETS, 525D, 535D, AND 545D WHEEL SKIDDERS, 815K SOIL COMPACTORS, 924K, 930K, 938K, 950L, 950GC, 950M, 962L, AND 962M WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LOW PRESSURE FUEL HOSE TO SECONDARY FUEL FILTER ON CERTAIN C7.1 GENERATOR SETS, 525D, 535D, AND 545D WHEEL SKIDDERS, 815K SOIL COMPACTORS, 924K, 930K, 938K, 950L, 950GC, 950M, 962L, AND 962M WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE SOFTWARE ON CERTAIN C15 AND C32 PETROLEUM ENGINES PRODUCT SUPPORT PROGRAM FOR UPDATING THE SOFTWARE ON CERTAIN C15 AND C32 PETROLEUM ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RELAY FOR THE AIR SHUT OFF VALVE ON CERTAIN C9.3, C13, C18, AND C27 INDUSTRIAL ENGINES, CX31-P600-C9I PETROLEUM POWER TRAIN PACKAGES, AND C15 PETROLEUM ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RELAY FOR THE AIR SHUT OFF VALVE ON CERTAIN C9.3, C13, C18, AND C27 INDUSTRIAL ENGINES, CX31-P600-C9I PETROLEUM POWER TRAIN PACKAGES, AND C15 PETROLEUM ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 10R4761 AND 10R4763 REMAN INJECTORS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 10R4761 AND 10R4763 REMAN INJECTORS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING CURRENT TRANSFORMER COILS (CT COILS) ON CERTAIN C4.4, AND C7.1 MARINE GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING CURRENT TRANSFORMER COILS (CT COILS) ON CERTAIN C4.4, AND C7.1 MARINE GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 432-4214 RECEPTACLE ASSEMBLY ON CERTAIN G3508B, G3512B, G3516B, AND G3520B PETROLEUM ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE 432-4214 RECEPTACLE ASSEMBLY ON CERTAIN G3508B, G3512B, G3516B, AND G3520B PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE SOFTWARE ON C13 GENERATOR SETS(XQ350 POWER MODULES) PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE SOFTWARE ON C13 GENERATOR SETS(XQ350 POWER MODULES)
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CAMSHAFT ON CERTAIN C8.7 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE CAMSHAFT ON CERTAIN C8.7 MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 361-5605 ENGINE OIL PUMPS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 361-5605 ENGINE OIL PUMPS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REWORKING THE DIESEL OXIDATION CATALYST ON CERTAIN 3512C LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING THE DIESEL OXIDATION CATALYST ON CERTAIN 3512C LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING BEARING SLEEVE RETAINING BOLTS ON CERTAIN 3512B HD AND 3516C HD GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR INSTALLING BEARING SLEEVE RETAINING BOLTS ON CERTAIN 3512B HD AND 3516C HD GENERATOR SETS