Usage:
25Nov2014 |
H380
H430
L262
N050
Y89B
After Failure Only (Limited distribution) | PRODUCT SUPPORT PROGRAM FOR REPLACING THE JACKET WATER BYPASS BRACKET AND TUBE ON CERTAIN 3512C LOCOMOTIVE ENGINES |
|
1380 | PS52824 |
NOTE: | Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar. |
NOTE: | This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS52824" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
TERMINATION DATE |
30Nov2019 |
PROBLEM
The existing Jacket Water Bypass Bracket can fail or the Jacket Water Bypass Tube can leak on certain 3512C Locomotive Engines. If the existing bracket fails it can/will result in a coolant leak on the tube joints at the thermostat housing or water pump. |
AFFECTED PRODUCT
Model | Identification Number |
3512C | NJT00102-00231 |
PARTS NEEDED
Qty |
Part Number | Description |
1 | 0S1587 | BOLT |
2 | 0S1588 | BOLT |
4 | 0S1594 | BOLT |
1 | 1F7958 | NUT-FULL |
2 | 1P7346 | WASHER-HARD |
2 | 2M0849 | WASHER-HARD |
1 | 2N0931 | GASKET |
12 | 5M2894 | WASHER-HARD |
2 | 6V5066 | SEAL-O RING |
1 | 6V6782 | CLIP-TOP |
1 | 6V6783 | CLIP-BOTTOM |
1 | 7E9075 | TUBE |
4 | 9S8752 | NUT-FULL |
1 | 1030892 | GROMMET |
4 | 1086170 | CLAMP AS |
2 | 1100096 | RING |
4 | 1653931 | BOLT-HEX HEAD |
1 | 4693803 | BRACKET |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 16% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
ACTION REQUIRED
Refer to Special Instruction, REHS9668. |
SERVICE CLAIM ALLOWANCES
0-80 mo |
NOTE: This is a 2.0-hour job | ||||||
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |