Hydraulic Tank - Assemble
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 422-5473 | Lifting Eye Assembly | 4 |
- Attach Tooling (A) and a suitable lifting device to hydraulic tank (29). The weight of hydraulic tank (29) is approximately
272 kg (600 lb) . Position mounts (31) and install bolts (30) on to hydraulic tank (29).Show/hide tableIllustration 2 g03440260 - Install plate (28). Repeat for opposite side.
Show/hide table
Illustration 3 g03439399 Show/hide tablePersonal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Install plug (27). Tighten plug (27) to a torque of
68 ± 7 N·m (50 ± 5 lb ft) . - Install seal (26), valve (25), spring (24), and guide (23).
Show/hide table
Illustration 4 g03439392 - Install drain (22) and nuts (21) and the washers.
Show/hide table
Illustration 5 g03439381 - Install tube assembly (20).
Show/hide table
Illustration 6 g03439367 - Install screen (17), plate (18), and nut (19). Tighten nut (19) to a torque of
20 ± 1 N·m (177 ± 9 lb in) .Show/hide tableIllustration 7 g03439358 - Install tube assembly (16).
Show/hide table
Illustration 8 g03439342 - Install screen (15), plate (14), and nut (13). Tighten nut (13) to a torque of
20 ± 4 N·m (177 ± 35 lb in) .Show/hide tableIllustration 9 g03439338 - Install screens (12) and bolts (11).
Show/hide table
Illustration 10 g03439318 - Install cover (10) and bolts (9).
Show/hide table
Illustration 11 g03439179 - Install receiver (8) and adapter (7).
Show/hide table
Illustration 12 g03439156 - Install sensor (6) and gage (5). Tighten the bolts for gage (7) to a torque of
10 ± 1 N·m (89 ± 9 lb in) . Tighten sensor (6) to a torque of20 ± 3 N·m (177 ± 27 lb in) .Show/hide tableIllustration 13 g03439102 - Install strainer assembly (4) and retaining ring (3).
Show/hide table
Illustration 14 g03439096 - Install cap assembly (2).
Show/hide table
Illustration 15 g03439081 - Install breather assembly (1).
Show/hide table
Illustration 1 | g03440281 |
End By:
- Install the hydraulic tank.
Caterpillar Information System:
C4.4 Engines for Caterpillar Built Machines Connecting Rod - For Use With Spheroidal Graphite Iron (SGI) Crankshaft
CB34B, CB34B XW, CC34B and CB36B Vibratory Utility Compactors Machine Systems Flow Divider Valve - Remove and Install - Traction Control
CP54B, CS54B and CS64B Vibratory Soil Compactors Machine Systems Machine Drive Power Angle Sensor - Calibrate
C4.4 Engines for Caterpillar Built Machines Main Bearing Journal - Spheroidal Graphite Iron (SGI) Crankshaft
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Oil Filter (Transmission)
VIMS3G Software Configuration Change Requirements and Issues Notification for Large Off-Highway Trucks{7601} VIMS3G Software Configuration Change Requirements and Issues Notification for Large Off-Highway Trucks{7601}
2013/09/19 New Power Train Software Is Now Used on Certain K Series Motor Graders {7620}
2013/09/24 Improved Retaining Ring Is Now Used in the Transmission Planetary Group on Certain Caterpillar Machines {3030, 3160}
Installation Procedure of the 440-4285 Screen As on Certain C175 Off-Highway Truck Engines{1151, 1162, 1206} Installation Procedure of the 440-4285 Screen As on Certain C175 Off-Highway Truck Engines{1151, 1162, 1206}
794 AC Off-Highway Truck Daily Inspection
793F Series AC, 795F Series AC and 795F Series AC XQ Off-Highway Trucks VIMS 3G, Monitoring, and Truck Payload Measurement System (TPMS) Payload Monitor (Scoreboard)
2013/10/03 The Hydraulic System Has Been Updated on the 797F Off-Highway Trucks {1408, 1439, 430S}
MT4400D AC Off-Highway Truck Engine Shutdown Switch - Push Button
A Rework Procedure to Replace the Expansion Tank Group Is Now Available for Certain PL61 Pipelayers and D6K Track-Type Tractors{1350, 1353} A Rework Procedure to Replace the Expansion Tank Group Is Now Available for Certain PL61 Pipelayers and D6K Track-Type Tractors{1350, 1353}
2013/10/09 New Sensor Routing on Certain 3412 and 3412C Engines {1408, 7451}
MT4400D AC Off-Highway Truck Disabled Machine Recovery
2013/09/19 A New Electronic Control Module Is Available for Certain C175 Machine Engines {1901}
794 AC Off-Highway Truck Lowering the Body with Engine Stopped
2013/10/10 New Rear View Mirror Arrangement Is Available for the 785C Off-Highway Truck {7255, 7256, 7319}
988K Wheel Loader, 834K Wheel Dozer and 836K Compactor Machine Systems Piston Pump (Brake) - Disassemble
988K Wheel Loader, 834K Wheel Dozer and 836K Compactor Machine Systems Piston Pump (Brake) - Assemble
MT4400D AC Off-Highway Truck Welding on Electric Drive Machines
794 AC Off-Highway Truck Backup Alarm - Test
2013/11/14 A Mud Guard Group is Now Used on the 795F AC Off-Highway Trucks {1061, 4220, 7000, 7051, 7150}