CB34B, CB34B XW, CC34B and CB36B Vibratory Utility Compactors Machine Systems Caterpillar


Flow Divider Valve - Remove and Install - Traction Control

Usage:

CC-34B 324

拆卸步骤

------ WARNING! ------

滚热的油或液压油的压力会对人员造成伤害。

发动机停机之后,液压油的压力仍会保留在液压系统里。 对液压系统进行维修之前,如果不事先释放压力,可能会造成严重伤害。

卸下液压系统的部件或管路时,确保所有的作业机具都已降到地面上,而且液压油温度已冷。 只能在发动机停机,并且加注口盖冷却到可以用徒手触摸时才能卸下加注口盖。



注意

在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。

有关适合收集和盛接卡特彼勒产品上液体的工具及用品,参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。

按照当地法规和指令处置所有液体。


注: 为便于安装,在所有管路、软管、导线和管子上做出识别标记。

  1. 打开发动机护罩。

  2. 将蓄电池断路开关转到断开位置。


    图 1g03440301


    图 2g03440303

  3. 断开线束组件 (3)。

  4. 将软管组件 (2) 和 (4) 从阀体 (1) 上断开。

  5. 拆下两根螺栓 (5) 和阀体 (1)。

安装步骤

  1. 按与拆卸相反的顺序安装阀体 (1)。

Caterpillar Information System:

CP54B, CS54B and CS64B Vibratory Soil Compactors Machine Systems Machine Drive Power Angle Sensor - Calibrate
C4.4 Engines for Caterpillar Built Machines Main Bearing Journal - Spheroidal Graphite Iron (SGI) Crankshaft
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Oil Filter (Transmission)
VIMS3G Software Configuration Change Requirements and Issues Notification for Large Off-Highway Trucks{7601} VIMS3G Software Configuration Change Requirements and Issues Notification for Large Off-Highway Trucks{7601}
2013/09/19 New Power Train Software Is Now Used on Certain K Series Motor Graders {7620}
2013/09/24 Improved Retaining Ring Is Now Used in the Transmission Planetary Group on Certain Caterpillar Machines {3030, 3160}
Installation Procedure of the 440-4285 Screen As on Certain C175 Off-Highway Truck Engines{1151, 1162, 1206} Installation Procedure of the 440-4285 Screen As on Certain C175 Off-Highway Truck Engines{1151, 1162, 1206}
794 AC Off-Highway Truck Daily Inspection
793F Series AC, 795F Series AC and 795F Series AC XQ Off-Highway Trucks VIMS 3G, Monitoring, and Truck Payload Measurement System (TPMS) Payload Monitor (Scoreboard)
2013/10/03 The Hydraulic System Has Been Updated on the 797F Off-Highway Trucks {1408, 1439, 430S}
2013/10/10 A New Plate Assembly is Now Used in the Air Starting Arrangements (If Equipped) on the 793F, and 797F Off-Highway Trucks {5500, 5501, 7516, 7540}
988K XE Wheel Loader Machine Systems Piston Pump (Hydraulic Fan) - Assemble
C4.4 Engines for Caterpillar Built Machines Connecting Rod - For Use With Spheroidal Graphite Iron (SGI) Crankshaft
988K XE Wheel Loader Machine Systems Hydraulic Tank - Assemble
MT4400D AC Off-Highway Truck Engine Shutdown Switch - Push Button
A Rework Procedure to Replace the Expansion Tank Group Is Now Available for Certain PL61 Pipelayers and D6K Track-Type Tractors{1350, 1353} A Rework Procedure to Replace the Expansion Tank Group Is Now Available for Certain PL61 Pipelayers and D6K Track-Type Tractors{1350, 1353}
2013/10/09 New Sensor Routing on Certain 3412 and 3412C Engines {1408, 7451}
MT4400D AC Off-Highway Truck Disabled Machine Recovery
2013/09/19 A New Electronic Control Module Is Available for Certain C175 Machine Engines {1901}
794 AC Off-Highway Truck Lowering the Body with Engine Stopped
2013/10/10 New Rear View Mirror Arrangement Is Available for the 785C Off-Highway Truck {7255, 7256, 7319}
988K Wheel Loader, 834K Wheel Dozer and 836K Compactor Machine Systems Piston Pump (Brake) - Disassemble
988K Wheel Loader, 834K Wheel Dozer and 836K Compactor Machine Systems Piston Pump (Brake) - Assemble
MT4400D AC Off-Highway Truck Welding on Electric Drive Machines
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.