Usage:
(1) Drill thirty-four 8.74 ± 0.76Ø mm (.344" ± .03"Ø) holes (A) in base (1) at the locations shown.
(2) Fasten center panels (2) and (3) and lower panels (4), (5), (6), (7), (8) and (9) loosely to the base. Install posts (10) and (11), frames (12) and (13), and braces (14) on grills (15) to make the end assemblies. Loosely fasten the end assemblies to lower panels (4) and (7).
(3) Put roof panels (16) and (17) in position. Loosely fasten the roof panels together and to center panels (2) and (3) and end assemblies (18) and (19). Install baffles (20) on the end assembly next to the radiator. Install doors (21). Tighten the bolts in the following sequence: 1) roof panel to roof panel, 2) roof panels to end assemblies and center panels, 3) end assemblies to lower panels, and 4) lower panels and center panels to base. Make sure all doors open and close without interference. Install 4N6948 Films at locations (B) and 8S8958 Films at locations (C).