Diesel Exhaust Fluid Module - Assemble
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 207-1601 | Rubber Lubricant | 1 |
207-1600(1) | Rubber Lubricant | 1 |
Show/hide table
(1) | For EAME use only |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install the O-ring seals (not shown) . Install DEF pump coolant connectors (42) and DEF pump connectors (43).
- Tighten DEF pump coolant connectors (42) to a torque of
5.5 ± 0.5 N·m (48 ± 4 lb in) . - Tighten DEF pump connectors (43) to a torque of
4.5 ± 0.5 N·m (40 ± 4 lb in) .Show/hide tableIllustration 2 g03348025 - Position harness assembly (36). Attach cable straps (41) to secure harness assembly (36) to support assembly (40).
Show/hide table
Illustration 3 g03347969 - Position diesel exhaust fluid pump (39) to support assembly (40). Install bolts (38). Tighten bolts (38) to a torque of
19 ± 2 N·m (168 ± 18 lb in) .Show/hide tableIllustration 4 g03347968 Show/hide tableIllustration 5 g03347960 - Position plate (34) and install bolts (37).
- Connect harness assembly (36).
- Attach cable straps (35) to secure harness assembly (36) to plate (34).
Show/hide table
Illustration 6 g03347957 - Install filter (33).
Show/hide table
Illustration 7 g03347950 - Install expansion device (32).
Show/hide table
Illustration 8 g03347947 - Install cover (31). Tighten cover (31) to a torque of
20 ± 5 N·m (177 ± 44 lb in) .Show/hide tableIllustration 9 g03347942 - Connect harness assembly (30) to electronic control (29). Position electronic control (29) and attach cable straps (28).
Show/hide table
Illustration 10 g03347938 - Position control module (27) and install bolts (26). Tighten bolts (26) to a torque of
10 ± 2 N·m (89 ± 18 lb in) .Show/hide tableIllustration 11 g03347932 - Install relays (25).
Show/hide table
Illustration 12 g03347926 - Install solenoid valve assembly (24). Connect harness assembly (23).
Show/hide table
Illustration 13 g03347922 - Install fitting (22) and the O-ring seal. Install plug (21) and the O-ring seal. Install O-ring seal (20).
Show/hide table
Illustration 14 g03347919 - Install manifold (19). Install cap (18).
Show/hide table
Illustration 15 g03347899 - Install hoses (17).
Show/hide table
Illustration 16 g03347893 - Apply Tooling (A) to the O-ring seals for hose assemblies (13) and (15).
- Install hose assembly (15) and the O-ring seal. Install clips (16). Tighten the bolts for clips (16) to a torque of
6 ± 1 N·m (53 ± 9 lb in) and maximum RPM of 60. - Install hose assembly (13) and the O-ring seal. Install clips (14). Tighten the bolts for clips (14) to a torque of
6 ± 1 N·m (53 ± 9 lb in) and maximum RPM of 60.Show/hide tableIllustration 17 g03347892 - Install bracket (12) to diesel exhaust fluid module tank (8).
Show/hide table
Illustration 18 g03347872 Show/hide tableIllustration 19 g03347861 - Position diesel exhaust fluid module tank (8) to diesel exhaust fluid module pump (10). Install bolts (11) and (9).
Show/hide table
Illustration 20 g03347785 - Install bolts (7).
Show/hide table
Illustration 21 g03348071 - Install plate (6). Install bolts (5). Tighten bolts (5) in the sequence shown in Illustration 21 to a torque of
5 ± 1 N·m (44 ± 9 lb in) . Tighten bolts (5) again in the sequence shown in Illustration 21 to a torque of5 ± 1 N·m (44 ± 9 lb in) .Show/hide tableIllustration 22 g03347767 - Connect harness assembly (3). Attach cable straps (4) to secure harness assembly (3) to the diesel exhaust fluid module.
Show/hide table
Illustration 23 g03347750 - Connect hoses (2).
- Apply Tooling (A) to the O-ring seals for hose assemblies (1). Connect hose assemblies (1).
Show/hide table
Illustration 1 | g06041020 |
Note: DEF pump coolant connectors (42) and DEF pump connectors (43) must be installed in the original location when removed. DEF pump coolant connectors (42) and DEF pump connectors (43) are not interchangeable.
End By:
- Install the diesel exhaust fluid module.
Caterpillar Information System:
793F CMD Off-Highway Truck Hydraulic Fan and Steering System Control Manifold (Steering)
2013/02/19 Air Conditioning Functionality and Electrical Module Protection Is Now Used on Certain Track Feller Buncher Machines {1408, 7301, 7320}
2013/02/21 New Software Is Now Used On Certain Skid Steer Loaders and Multi Terrain Loaders {7620}
814K, 816K, 826K 836K Landfill Compactors, 815K, 825K, Soil Compactors, 824K, 834K, 844K, 854K Wheel Dozers and 986K, 988K, 990K, 992K,994K Wheel Loaders Information Display System Information Menu
725C Articulated Truck Specifications
Additional Information for Troubleshooting Transmission, Differential Lock, and All Wheel Drive Solenoid Failures on Backhoe Loaders{3030, 3258} Additional Information for Troubleshooting Transmission, Differential Lock, and All Wheel Drive Solenoid Failures on Backhoe Loaders{3030, 3258}
C7.1 Engines for Caterpillar Built Machines Turbocharger
C4.4 Engines for Caterpillar Built Machines Fuel Priming Pump - Mechanical Priming Pump
735B and 740B Articulated Trucks Lowering the Body with Engine Stopped
2384C, 2484C, 559C and 579C Knuckleboom Loaders Engine Enclosure - Remove and Install
C175-16 Locomotive Engine Fuel Filter Base
C4.4 Industrial Engine Alternator and Fan Belts - Replace
793F CMD Off-Highway Truck Hydraulic Fan and Steering System Control Manifold (Steering)
MH3049 Material Handler Machine System Cab Riser
2013/02/19 Recommended Method for Removing Tool Holders on Certain Cold Planers {6637}
C13, C15, and C18 Tier 4 Final Engines Magnetic Pickup
C175-16 Locomotive Engine Temperature Sensor
C7.1 Engines for Caterpillar Built Machines Fuel Priming Pump - Electric Fuel Priming Pump
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Fuel Manifold - Remove and Install - Clean Emissions Module
C4.4 Industrial Engine Fuel System - Prime
2384C, 2484C, 559C and 579C Knuckleboom Loaders Machine Systems Stabilizer Cylinder - Remove and Install
2384C, 2484C, 559C and 579C Knuckleboom Loaders Machine Systems Stabilizer - Remove and Install
A New Procedure to Reduce Warm Air Flow on Certain Vibratory Asphalt Compactors{1350, 7000, 7300} A New Procedure to Reduce Warm Air Flow on Certain Vibratory Asphalt Compactors{1350, 7000, 7300}
2384C, 2484C, 559C and 579C Knuckleboom Loaders Refrigerant Condenser - Remove and Install