Control Manifold (Steering)
Show/hide table
| |
| Illustration 1 | g03348021 |
Show/hide table
| |
| Illustration 2 | g03348049 |
The relief valve manifold (1) contains the following components:
- Pressure reducing valve (2)
- Pressure reducing valve (3)
- Relief valve (4)
- Relief valve (5)
- Oil filter (6)
- Oil filter bypass valve (7)
- Oil filter (8)
- Oil filter bypass valve (9)
Oil from the solenoid and relief valve (10) flows to the primary pressure reducing valve and the secondary pressure reducing valve. The pressure reducing valves reduce the oil pressure for the primary and secondary oil circuits. The relief valves limit the oil pressure in the primary and secondary oil circuits. The reduced oil pressure flows through the oil filters to the P1 circuit (11) and the P2 circuit (12). The P1 circuit oil flows to the primary diverter solenoid (14) and to the steering pilot shutoff solenoid (15). The P2 circuit oil flows to the secondary diverter solenoid (16) and to the secondary steering solenoids (17).
Caterpillar Information System:
2013/02/19 Air Conditioning Functionality and Electrical Module Protection Is Now Used on Certain Track Feller Buncher Machines {1408, 7301, 7320}
2013/02/21 New Software Is Now Used On Certain Skid Steer Loaders and Multi Terrain Loaders {7620}
814K, 816K, 826K 836K Landfill Compactors, 815K, 825K, Soil Compactors, 824K, 834K, 844K, 854K Wheel Dozers and 986K, 988K, 990K, 992K,994K Wheel Loaders Information Display System Information Menu
725C Articulated Truck Specifications
Additional Information for Troubleshooting Transmission, Differential Lock, and All Wheel Drive Solenoid Failures on Backhoe Loaders{3030, 3258} Additional Information for Troubleshooting Transmission, Differential Lock, and All Wheel Drive Solenoid Failures on Backhoe Loaders{3030, 3258}
C7.1 Engines for Caterpillar Built Machines Turbocharger
C4.4 Engines for Caterpillar Built Machines Fuel Priming Pump - Mechanical Priming Pump
735B and 740B Articulated Trucks Lowering the Body with Engine Stopped
2384C, 2484C, 559C and 579C Knuckleboom Loaders Engine Enclosure - Remove and Install
C175-16 Locomotive Engine Fuel Filter Base
C4.4 Industrial Engine Alternator and Fan Belts - Replace
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324} Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Diesel Exhaust Fluid Module - Assemble
793F CMD Off-Highway Truck Hydraulic Fan and Steering System Control Manifold (Steering)
MH3049 Material Handler Machine System Cab Riser
2013/02/19 Recommended Method for Removing Tool Holders on Certain Cold Planers {6637}
C13, C15, and C18 Tier 4 Final Engines Magnetic Pickup
C175-16 Locomotive Engine Temperature Sensor
C7.1 Engines for Caterpillar Built Machines Fuel Priming Pump - Electric Fuel Priming Pump
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Fuel Manifold - Remove and Install - Clean Emissions Module
C4.4 Industrial Engine Fuel System - Prime
2384C, 2484C, 559C and 579C Knuckleboom Loaders Machine Systems Stabilizer Cylinder - Remove and Install
2384C, 2484C, 559C and 579C Knuckleboom Loaders Machine Systems Stabilizer - Remove and Install
A New Procedure to Reduce Warm Air Flow on Certain Vibratory Asphalt Compactors{1350, 7000, 7300} A New Procedure to Reduce Warm Air Flow on Certain Vibratory Asphalt Compactors{1350, 7000, 7300}