Cab - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 138-7574 | Link Bracket | 4 |
6V-3532 | Bolt | 4 |
Start By:
- Connect the steering frame lock.
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedures.
Show/hide table
Illustration 1 g03346608 - Disconnect harness assemblies (1). Disconnect harness clip (2) from the cab.
Show/hide table
Illustration 2 g03346610 - Disconnect harness assemblies (3). Disconnect harness clip (4) from the cab.
Show/hide table
Illustration 3 g03346618 - Disconnect harness assemblies (5) and harness assembly (6). Cut the cable strap and disconnect cable assembly (7). Disconnect harness clips (8) from the cab.
Show/hide table
Illustration 4 g03346622 - Disconnect ground straps (9) from the cab.
Show/hide table
Illustration 5 g03346626 - Remove nuts (10) in order to lower brake valve (11).
Show/hide table
Illustration 6 g03346630 - Disconnect hose assemblies (12).
Show/hide table
Illustration 7 g03346632 - Disconnect hoses (13).
Show/hide table
Illustration 8 g03346635 - Close valve (14). Disconnect hoses (15).
Show/hide table
Illustration 9 g03346736 - Remove bolts (16).
Show/hide table
Illustration 10 g03349992 Show/hide tableIllustration 11 g03346776 Typical Example - Attach Tooling (A) and a suitable lifting device to cab (17). The weight of cab (17) is approximately
1270 kg (2800 lb) . - Remove bolts (18). Use Tooling (A) and the suitable lifting device in order to remove cab (17).
- Install cab (17) in the reverse order of removal.
Caterpillar Information System:
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Cab - Remove and Install - Extended Reach
MH3049 Material Handler Machine Systems Solenoid Valve and Manifold (Hydraulic Lockout) - Remove and Install
C9.3 Engines for Caterpillar Built Machines Combustion Head - Remove and Install - Clean Emissions Module
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Steering Valve - Remove and Install
C4.4 Industrial Engine Fluid Recommendations - Coolant Specification
C4.4 Industrial Engine Fluid Recommendations - Fuel
C9.3 Engines for Caterpillar Built Machines Solenoid Valve (ARD Fuel) - Remove and Install
2013/05/31 New Fuel Lines Kits Are Used on Certain C9.3 Machine Engines {1288}
C13, C15, and C18 Tier 4 Interim Engines Codes that Inhibit Operation of Aftertreatment System
C4.4 Industrial Engine Cold Weather Operation
C7.1 Engines for Caterpillar Built Machines Fuel Filter Base - Twin Secondary Fuel Filter Base
986H Wheel Loader Machine Systems Service Brake - Check
R1600G Load Haul Dump Steering System Secondary Steering System
R1600H Load Haul Dump Steering System Control Valve (STIC Steering)
R1600G Load Haul Dump Steering System Control Valve (STIC Steering)
M316D, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Machine System Specifications Tire and Rim
MH3049 Material Handler Machine System Stick Position Sensor and Mounting
MH3049 Material Handler Machine System Walkway
MH3049 Material Handler Machine System Access Door
C7.1 Engines for Caterpillar Built Machines Fuel System - Prime
C7.1 Engines for Caterpillar Built Machines Compression - Test
MH3049 Material Handler Machine System Lift Position Sensor and Mounting
MH3049 Material Handler Machine System Swing Drive Fastener
C7.1 Engines for Caterpillar Built Machines Introduction