MH3049 Material Handler Machine System Caterpillar


Stick Position Sensor and Mounting

Usage:

MH3049 HPB


Illustration 1g03639016
Left side view

Table 1
Specification for 395-9417 Stick Position Sensor and Mounting Gp 
Item  Qty  Part  Specification Description 
150-4086 Screw  Torque to 1.7 ± 0.4 N·m (15.0 ± 3.5 lb in)
The gap between 395-9202 Position Sensor Gp (2) and 395-9217 Shaft (3) must be 0 to 4 mm (0.0 to 0.2 inch). Set position marking on 395-9217 Shaft (3) in the direction of 395-9202 Position Sensor Gp (2) cable which yield a 50% output signal. 

Caterpillar Information System:

M316D, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Machine System Specifications Tire and Rim
R1600G Load Haul Dump Steering System Control Valve (STIC Steering)
R1600H Load Haul Dump Steering System Control Valve (STIC Steering)
R1600G Load Haul Dump Steering System Secondary Steering System
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Cab - Remove and Install
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Cab - Remove and Install - Extended Reach
MH3049 Material Handler Machine Systems Solenoid Valve and Manifold (Hydraulic Lockout) - Remove and Install
C9.3 Engines for Caterpillar Built Machines Combustion Head - Remove and Install - Clean Emissions Module
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Steering Valve - Remove and Install
C4.4 Industrial Engine Fluid Recommendations - Coolant Specification
C4.4 Industrial Engine Fluid Recommendations - Fuel
C9.3 Engines for Caterpillar Built Machines Solenoid Valve (ARD Fuel) - Remove and Install
MH3049 Material Handler Machine System Walkway
MH3049 Material Handler Machine System Access Door
C7.1 Engines for Caterpillar Built Machines Fuel System - Prime
C7.1 Engines for Caterpillar Built Machines Compression - Test
MH3049 Material Handler Machine System Lift Position Sensor and Mounting
MH3049 Material Handler Machine System Swing Drive Fastener
C7.1 Engines for Caterpillar Built Machines Introduction
C7.1 Engines for Caterpillar Built Machines Basic Engine
C7.1 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
C7.1 Engines for Caterpillar Built Machines Air Inlet and Exhaust System - Inspect
C7.1 Engines for Caterpillar Built Machines Turbocharger - Inspect
C7.1 Engines for Caterpillar Built Machines Fuel Injection
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.