Steering Valve - Remove and Install
开始:
- 连接转向机架锁。
- 释放液压系统压力。
- 保留液压油箱油。
Show/hide table
| 注意 |
|---|
|
在检查、保养、测试、调整及维修产品时，请小心确保盛接油液。 在打开任何舱室或拆卸任何含有油液的部件前，请准备好盛接液体用的适当容器。 |
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
- 断开软管组件 (1)。
Show/hide table
图 2 g03346424 - 断开线束组件 (2)。
Show/hide table
图 3 g03346427 - 拆下夹子 (3)。 断开管组件 (4)。
Show/hide table
图 4 g03346431 - 断开软管组件 (5)。
Show/hide table
图 5 g03346434 - 断开软管组件 (6)。
Show/hide table
图 6 g03346541 - 断开线束组件 (7)。
Show/hide table
图 7 g03346546 - 断开软管组件 (8)。
Show/hide table
图 8 g03346552 - 将适当的起吊设备连接到转向阀 (9) 上。 转向阀 (9) 的重量约为
32 kg (70 lb) 。Show/hide table
图 9 g03346560 - 拆下螺栓 (10)。 使用适当的起吊设备拆卸转向阀 (9)。
Show/hide table
| |
| 图 1 | g03346416 |
- 按与拆卸相反的顺序安装转向阀 (9)。
Caterpillar Information System:
C4.4 Industrial Engine Fluid Recommendations - Coolant Specification
C4.4 Industrial Engine Fluid Recommendations - Fuel
C9.3 Engines for Caterpillar Built Machines Solenoid Valve (ARD Fuel) - Remove and Install
2013/05/31 New Fuel Lines Kits Are Used on Certain C9.3 Machine Engines {1288}
C13, C15, and C18 Tier 4 Interim Engines Codes that Inhibit Operation of Aftertreatment System
C4.4 Industrial Engine Cold Weather Operation
C7.1 Engines for Caterpillar Built Machines Fuel Filter Base - Twin Secondary Fuel Filter Base
986H Wheel Loader Machine Systems Service Brake - Check
C7.1 Engines for Caterpillar Built Machines Crankcase Breather
C4.4 Industrial Engine Starting the Engine
MH3049 Material Handler Hydraulic System Hydraulic Oil Cooler
M316D, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Machine System Specifications Joystick Control
C9.3 Engines for Caterpillar Built Machines Combustion Head - Remove and Install - Clean Emissions Module
MH3049 Material Handler Machine Systems Solenoid Valve and Manifold (Hydraulic Lockout) - Remove and Install
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Cab - Remove and Install - Extended Reach
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Cab - Remove and Install
R1600G Load Haul Dump Steering System Secondary Steering System
R1600H Load Haul Dump Steering System Control Valve (STIC Steering)
R1600G Load Haul Dump Steering System Control Valve (STIC Steering)
M316D, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Machine System Specifications Tire and Rim
MH3049 Material Handler Machine System Stick Position Sensor and Mounting
MH3049 Material Handler Machine System Walkway
MH3049 Material Handler Machine System Access Door
C7.1 Engines for Caterpillar Built Machines Fuel System - Prime