735B and 740B Articulated Trucks Caterpillar


Suspension and Suspension Cylinder Bearings - Lubricate

Usage:

735B L4D


PERHATIAN

Periksa apakah pipa saluran yang terpasang pada semua fiting gemuk pelumas jauh tidak dalam keadaan rusak. Apabila pipa saluran gemuk pelumas putus, gemuk pelumas tidak akan mencapai komponen yang memerlukan pelumasan. Kerusakan pada alat berat dapat terjadi.


Pelumasan harus dilakukan dengan interval yang disarankan. Gemuk harus diberikan hingga gemuk segar muncul di sambungan.

  1. Parkir alat berat pada bidang datar. Pastikan rem parkir telah diaktifkan sepenuhnya dan hentikan engine. Pasang kunci rangka pengemudian. Rujuk ke Buku Petunjuk Pengoperasian dan Perawatan, "Kunci Rangka Pengemudian".

    Catatan: Fitting untuk pelumasan silinder suspensi depan terletak di penyangga belakang untuk spatbor pada traktor.

  2. Lepaskan tutup dan bersihkan semua fitting dengan menyeka permukaan fitting sebelum melumasinya.


    Ilustrasi 1g02441237

  3. Lumasi bantalan silinder suspensi depan kiri melalui fitting (1).


    Ilustrasi 2g02441238

  4. Lumasi bantalan silinder suspensi depan kanan melalui fitting (2). Lumasi bantalan sferis pada rangka-a suspensi depan melalui fitting (3).

    Catatan: Fitting untuk pelumasan bantalan sferis pada rangka-a suspensi belakang terletak di bagian depan trailer di sisi kiri.



    Ilustrasi 3g02441317

  5. Lumasi bantalan sferis pada rangka-a suspensi belakang melalui fitting (4).

  6. Pasang tutup ke fitting.

  7. Lepaskan kunci rangka pengemudian. Rujuk ke Buku Petunjuk Pengoperasian dan Perawatan, "Kunci Rangka Pengemudian".

Caterpillar Information System:

CD54B Vibratory Asphalt Compactor Machine Systems Gear Motor (Hydraulic Fan)
CD54B Vibratory Asphalt Compactor Machine Systems Gear Pump (Fan Drive)
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Electronic Service Tool Does Not Communicate
CD54B Vibratory Asphalt Compactor Machine Systems Location of Electrical Components - Fan System
735B and 740B Articulated Trucks Automatic Lubrication Grease Tank - Fill - If Equipped
CD54B Vibratory Asphalt Compactor Machine Systems General Information (Fan Drive Hydraulic System)
Installation Guide for Cat® Terrain for Drilling on PLC Drills {7490, 7605} Installation Guide for Cat® Terrain for Drilling on PLC Drills {7490, 7605}
CD54B Vibratory Asphalt Compactor Machine Systems Position Sensor (Steering) - Calibrate
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620} Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
770 and 772 Off-Highway Truck Maintenance Interval Schedule
CD54B Vibratory Asphalt Compactor Machine Systems Steering Valve Current Minimum - Calibrate
2013/11/11 New Version 4.65 Firmware Is Now Available for MS952, MS972, and MS992 GPS Receivers Used On Machine Control and Guidance Products {7010}
CD54B Vibratory Asphalt Compactor Machine Systems Fan Drive Hydraulic Components
CD54B Vibratory Asphalt Compactor Machine Systems Electrical Schematic (Hydraulic Fan)
770G and 772G Off-Highway Truck Systems Electronic Control (HVAC System)
770G and 772G Off-Highway Truck Systems Electrical System
CD54B Vibratory Asphalt Compactor Machine Systems Hydraulic Schematic (Hydraulic Fan)
Cat® Command for Hauling - 793F CMD Onboard Autonomy Setup and Configuration Guide {7605, 7610, 7620} Cat® Command for Hauling - 793F CMD Onboard Autonomy Setup and Configuration Guide {7605, 7610, 7620}
C1.5 and C2.2 Engines for Caterpillar Built Machines Coolant Temperature Sensor
424B Backhoe Loader Machine Systems Bucket Positioner Control - Remove and Install
CD54B Vibratory Asphalt Compactor Machine Systems General Information (Water Spray System)
3516B Engine for the MT4400D Off-Highway Truck Air Lines - Aftercooler
CD54B Vibratory Asphalt Compactor Machine Systems Operator Controls (Water Spray System)
MH3049 Material Handler Hydraulic System Location of Components (Boom Systems)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.