Residual Magnetism - Restore
Show/hide table
 | |
| Illustration 1 | g03279599 |
(1) "B+" terminal (2) Ground terminal (3) "R" terminal | |
- Connect a voltmeter between the "B+" terminal (1) and the alternator case ground (2) .
- Start the engine and set the throttle to at least 75%.
- Connect one end of a jumper wire to the "B+" terminal (1) of the alternator.
- Connect the other end of the jumper wire to the "R" terminal (3) of the alternator for two seconds.
- If the voltage output rises, the residual magnetism of the rotor has been restored. The alternator is now charging. If the voltage output does not rise, there is an internal problem with the alternator. Replace the alternator or proceed to Systems Operation, "Component Description". Use the descriptions of the components in order to determine the component that has failed. Proceed to the appropriate component test.
Caterpillar Information System:
CB44B Vibratory Asphalt Compactor Propel System (Solid Drum) Piston Motor (Propel) - Solid Drum
2012/10/02 Improved Contact Wear Plates Now Used on Certain Felling Heads {0679, 6820, 7050, 7051}
Procedure to Install 417-6250 Blade Ar to Certain Vibratory Soil Compactors{6060} Procedure to Install 417-6250 Blade Ar to Certain Vibratory Soil Compactors{6060}
Procedure to Install 417-6252 Blade Ar to Certain Vibratory Soil Compactors{6060} Procedure to Install 417-6252 Blade Ar to Certain Vibratory Soil Compactors{6060}
Procedure to Install 417-6249 Blade Ar to Certain Vibratory Soil Compactors{6060} Procedure to Install 417-6249 Blade Ar to Certain Vibratory Soil Compactors{6060}
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Shutdown Occurs Intermittently
450F Backhoe Loader Transmission (Autoshift) Solenoid Valve (Autoshift)
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Overspeeds
Load Haul Dump Machines Vital Information Management System (VIMS)TM Service Tool Software
MH3049 Material Handler Magnet Operation - If Equipped
MH3049 Material Handler Magnet Control - If Equipped
826K Landfill Compactor Battery - Clean
2012/10/23 New Cab Strut Spacers Are Now Used on Series D Skid Steer Loaders and Compact Track Loaders {7301}
Alternator - Bosch K1/N1 Insulated Screw - Check
2013/02/28 New HE Check Valve is Now Available on Certain Medium Wheel Loaders {5004, 5054, 5066, 5067}
826K Landfill Compactor Battery Hold-Down - Tighten
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Stalls at Low RPM
521B and 522B Track Feller Bunchers Engine Supplement Unit Injector Hydraulic Pump - Remove and Install
559C and 579C Knuckleboom Loaders Solenoid Valve and Manifold - Thermal Bypass
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Vibration Is Excessive
826K Landfill Compactor Brake Accumulator - Check
CB44B Vibratory Asphalt Compactor Propel System (Solid Drum) Electrical Schematic (Propel System) - Solid Drum
C1.5 and C2.2 Engines for Caterpillar Built Machines Exhaust Has Excessive Black Smoke
745 Articulated Truck Aftercooler Core - Inspect/Clean