Solenoid Valve (Autoshift)
Show/hide table
 | |
| Illustration 1 | g03266256 |
Show/hide table
| Specification for 270-0527 Solenoid Valve Gp | |||
| Item | Qty | Part | Specification description |
| 1 | 1 | 336-6824 Plug | Torque to 10 to 20 N·m (89 to 177 lb in). |
| 2 | 1 | 280-7009 Coil | Operating voltage is 12.0 ± 1.2 V. Torque to 2.5 to 3.5 N·m (22.1 to 31.0 lb in). |
| 3 | 1 | 280-7012 Tube As | Torque to 25 to 35 N·m (221 to 310 lb in). |
| 4 | 2 | 336-4714 Centering Spring | Free length after test is 13.3 mm (0.52 inch). |
| 5 | 2 | 336-6831 Spring | Free length after test is 48.3 mm (1.90 inch). |
| 6 | 1 | 336-7114 Spring | Free length after test is 55.8 to 56.8 mm (2.20 to 2.24 inch). |
| 7 | 1 | 336-4729 Head | Torque to 25 to 35 N·m (221 to 310 lb in). |
Caterpillar Information System:
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Overspeeds
Load Haul Dump Machines Vital Information Management System (VIMS)TM Service Tool Software
MH3049 Material Handler Magnet Operation - If Equipped
MH3049 Material Handler Magnet Control - If Equipped
826K Landfill Compactor Battery - Clean
2012/10/08 Improved Fuel Level Sender As Is Now Used on Certain Cat® Products {1273, 7481}
793F and 797F Off-Highway Trucks Power Train Electronic Control System Event Code List
Cab Update Procedure for Certain Off-Highway Trucks{1408, 5057, 7301, 7960} Cab Update Procedure for Certain Off-Highway Trucks{1408, 5057, 7301, 7960}
735C and 745C Articulated Trucks Operation Information
735C and 745C Articulated Trucks Transmission Control
735C and 745C Articulated Trucks Retarder Control
Cab Update Procedure for Certain Off-Highway Trucks{1408, 5057, 7301, 7960} Cab Update Procedure for Certain Off-Highway Trucks{1408, 5057, 7301, 7960}
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Shutdown Occurs Intermittently
Procedure to Install 417-6249 Blade Ar to Certain Vibratory Soil Compactors{6060} Procedure to Install 417-6249 Blade Ar to Certain Vibratory Soil Compactors{6060}
Procedure to Install 417-6252 Blade Ar to Certain Vibratory Soil Compactors{6060} Procedure to Install 417-6252 Blade Ar to Certain Vibratory Soil Compactors{6060}
Procedure to Install 417-6250 Blade Ar to Certain Vibratory Soil Compactors{6060} Procedure to Install 417-6250 Blade Ar to Certain Vibratory Soil Compactors{6060}
2012/10/02 Improved Contact Wear Plates Now Used on Certain Felling Heads {0679, 6820, 7050, 7051}
CB44B Vibratory Asphalt Compactor Propel System (Solid Drum) Piston Motor (Propel) - Solid Drum
Alternator - Bosch K1/N1 Residual Magnetism - Restore
2012/10/23 New Cab Strut Spacers Are Now Used on Series D Skid Steer Loaders and Compact Track Loaders {7301}
Alternator - Bosch K1/N1 Insulated Screw - Check
2013/02/28 New HE Check Valve is Now Available on Certain Medium Wheel Loaders {5004, 5054, 5066, 5067}
826K Landfill Compactor Battery Hold-Down - Tighten
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Stalls at Low RPM