The Service Wiring Group Has Been Updated on 777G Off-Highway Truck {1408, 7513}
- Off-Highway Truck:
- 777G (S/N: T5A1-UP; TNM1-UP; RDR1-UP; T4Y1-UP)
Description of Change: The service wiring group has been updated with a new fastener for the power studs. The new fastener has a shorter length to eliminate a potential electrical short on the chassis.
Adaptable To: The new 7Y-7389 Screw replaces the former 260-6686 Bolt in the 357-1562 Service Center Wiring Gp.
Show/hide table
Illustration 1 | g03203340 |
Show/hide table
Illustration 2 | g03202357 |
View of area A |
The new 7Y-7389 Screw (1) is adaptable to the machines and effective in production with the machines that are listed in Table 1.
Show/hide table
Model     | Adaptable Serial numbers     | Effective Serial Numbers     |
777G     | S/N:RDR1-216     | S/N:RDR217-UP     |
S/N:TNM1-535 | S/N:TNM536-UP     | |
777G OEM     | S/N:T4Y1-139     | S/N:T4Y140-UP     |
S/N:T5A1-111 | S/N:T5A112-UP     |
Show/hide table
Required Parts List     | ||||
Item     | Qty     | New Part Number     | Description     | Former Part Number     |
1     | 2     | 7Y-7389     | Screw     | 260-6686     |
Caterpillar Information System:
R3000H Load Haul Dump Steering System Pilot Valve (STIC Steering)
988K XE Wheel Loader Systems Foot Brake Control
R3000H Load Haul Dump Braking System Pressure Switch (Parking Brake Oil)
R3000H Load Haul Dump Power Train Gear Pump (Torque Converter Scavenge)
R3000H Load Haul Dump Power Train Relief Valve (Torque Converter Outlet)
559C and 579C Knuckleboom Loaders Hydraulic Oil Contamination - Test
Procedure to Rework Hydraulic System on the AS4251C Asphalt Screeds {5050} Procedure to Rework Hydraulic System on the AS4251C Asphalt Screeds {5050}
CW14 Pneumatic CompactorEngine Supplement Alternator - Remove and Install
C175-16 and C175-20 Engines for Off-Highway Trucks Turbocharger
C13 Tier 4 Final Engines Engine Speed - Check
CB34B, CB34B XW, CB36B and CC34B Utility Compactors Belts - Inspect/Adjust/Replace
CB22B, CB24B, CB32B and CC24B Utility Compactors Water Tank Strainer - Clean and Inspect
C7.1 Industrial Engine Inlet Air Control - Remove - NRS Inlet Air Mixer
C7.1 Industrial Engine Inlet Air Control - Install - NRS Inlet Air Mixer
C7.1 Industrial Engine Fuel Injection Pump - Remove
C7.1 Industrial Engine Fuel Injection Pump - Install
C7.1 Industrial Engine Fuel Injection Pump Gear - Remove
C7.1 Industrial Engine Fuel Injection Pump Gear - Install
C7.1 Industrial Engine Electronic Unit Injector - Remove
C7.1 Industrial Engine Electronic Unit Injector - Install
C7.1 Industrial Engine Turbocharger - Remove - Second Stage Turbocharger
C7.1 Industrial Engine Turbocharger - Remove - First Stage Turbocharger
C7.1 Industrial Engine Turbocharger - Install - Second Stage Turbocharger
C7.1 Industrial Engine Turbocharger - Install - First Stage Turbocharger